Advertisement
Step B
Enjoy
Playing a USB mass storage device
1
Make sure that your BTM177 is being powered on.
2
SOURCE
Press
The LCD display shows USB.
3
Plug a compatible USB mass storage device to BTM177's USB port marked
If needed, use a suitable USB cable to connect between the device and BTM177's USB port.
The device will automatically power on.
4
ÉÅ
Press
on your BTM177 to start playback.
5
9
Press
to stop playback.
Operating a Bluetooth-enabled device via the system
1
Place a Bluetooth-enabled device for pairing within 10 meters from the system.
2
Press
SOURCE
on the top of the system (or
Bluetooth source.
3
Press and hold
PAIRING
seconds.
4
Set the Bluetooth-enabled device to search for other available Bluetooth devices until it recognizes "PHILIPS
BTM177".
5
Select "PHILIPS BTM177" and wait until you hear a double beep from the system and the Bluetooth icon
turns on.
➜
Enter "0000" when prompted for a keyword.
6
For a paired HFP and/or HSP mobile phone, you can receive, reject or hold a call via the system with the
,
PAIRING
●
For a paired A2DP device, you can enjoy music from it with the ÉÅ,
via the system.
USB
repeatedly (or
on the top of the system or the remote control for more than 3
9
and
buttons respectively.
C Royal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com
on the remote) to enter USB mode.
BLUETOOTH
on the remote control) to select the
Tip:
Refer to the user manual supplied for
the description about compatibility of
USB mass storage device, and
playability of the files stored on the
USB device.
.
¡ /
™,
S/T
9
and
buttons
PDCC-JW-0809
Advertisement
