Philips MCD395/12 User Manual page 18

Controls
6
DISC MENU (disc mode only)
– DVD/VCD: enters or exits the disc contents
menu.
– VCD2.0: switches the playback control mode on
or off .
22/33
7
Tuner
– press to tune to a lower/higher radio frequency
gradually.
– press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc
– (not for MP3 CD) searches backward/forward in
a disc at different speeds.
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
3/4
8
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
9 OK
– to exit or confirm the selection.
0
í/ë
– Disc: skips to the previous/next chapter/title/
track.
– Tuner: selects a preset radio station.
9
!
– In DISC mode, to stop playback or clear a
program.
2;
@
– In DISC mode, to start or interrupt playback.
#
VOL +/-
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
$
MODE
– to select various repeat modes or the shuffle
play mode for a disc.
%
SUBTITLE
– selects a subtitle language.
^
SLEEP/TIMER
Standby mode
– sets a time for switching on the system
automatically.
Playback mode
– sets the sleep timer function (auto-off).
18
&
LOUD/DBB
– enables or disables automatic loudness
adjustment.
– enables or disables bass enhancement.
*
DSC
– selects different types of preset sound equalizer
settings (CLASSIC, JAZZ, POP or ROCK).
(
MUTE
– to interrupt or resume sound reproduction.
)
DISPLAY/RDS
for disc
– selects a disc information display mode.
for tuner
– selects RDS information.
¡
REPEAT A-B
– for VCD/CD: to repeat a specific section within
the same track.
– for DVD: to repeat a specific section in a disc.
™
AUDIO
for VCD
– sets Stereo, Mono-Left or Mono-Right sound
mode.
for DVD
– selects an audio language.
£
ZOOM
– DVD/VCD/Picture CD: enlarges or reduces a
picture or active image on the TV screen.
≤
GOTO
– In DISC mode, to fast search in a disc by
entering a time, title, chapter or track.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or
TUNER, for example).
– Then select the desired function ( 2;, í,
ë for example).