Page 1
North States Industries Juvenile Product Line Stairway Gate - Model 8670 (manual can be used for Walk-Thru Pet Gate) Dear Customer, Thank you for selecting our product! This gate was designed for ease of use, safety and maximum value. Please take a few minutes to read and follow these instructions and warnings.
Page 2
North States Industries Juvenile Product Line MS / 4 Mounting Socket 4 / $2.00 S / 16 No. 6 x 5/8 Screws 16 / $1.00 RH / 1 Release Handle 1 / $2.00 Installation Instructions Your Stairway Gate is a hinge mounted gate, that when installed correctly, should not swing out over a stairway.
Page 3
North States Industries Juvenile Product Line To attach the hinge side of the gate to the mounting sockets, refer to (figure 4). Note that to align the hinge posts over the mounting sockets, the gate must be at a 45-90 degree angle to the plane of the opening.
Page 4
North States Industries Juvenile Product Line To unlock the gate, pull back on the release handle, and lift up on the gate panel until the locking pegs clear the sockets (figure 8). WARNING To prevent serious injury or death, securely install gate and use according to manufacturer's instructions.
Page 5
North States Industries Juvenile Product Line file:///C|/Documents%20and%20Settings/David/Desktop/stairway_gate_8670.htm (5 of 5)2/8/2009 12:47:11 PM...
Need help?
Do you have a question about the 8670 and is the answer not in the manual?
Questions and answers