Cd/Mp3/Wma Operation; Playing A Disc; Basic Playback Controls; Playing An Mp3/Wma Disc - Philips MCM138D/98 User Manual

CD/MP3/WMA Operation

M I C R O S Y S T E M
iR
TRK
CD
IMPORTANT:
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD-
Recordables, CD-Rewritables, MP3 CD and
WMA CD.
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Press OPEN/CLOSE3 on the top of the
system to open the CD compartment.
➜ OPEN is displayed when you open the CD
compartment.
3
Insert a disc with the printe=d side facing up and
press down on OPEN/CLOSE3 to close the
CD door.
12
M C M 1 3 8 D
POP
PROG
DBB
MP3 REP ALL
➜ READ is displayed as the CD player scans the
contents of a disc, and then the total number of
tracks and playing time (or the total number of
albums and tracks for MP3/WMA disc) are shown.

Basic playback controls

To play a disc
●
Press 2; to start playback.
➜
The current track number and elapsed
playing time of the track are displayed during disc
playback.
To select a different track
● Press ¡1 2™ once or repeatedly until the
desired track number appears in the display.
To find a passage within a track
1
Press and hold down on ¡1 2™.
➜
The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release ¡1 2™.
➜
Normal playback continues.
To interrupt playback
●
Press 2; during playback.
➜
The display freezes and the elapsed playing
time flashes when playback is interrupted.
➜
To resume, press 2; again.
To stop playback
● Press 9.
Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER.
– you select standby
Playing an MP3,WMA disc
1
Load an MP3/WMA disc.
➜
The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜ "XXX YY" is displayed. XXX is the current
track number and YY is the current album
number.
2
Press ALBUM 4 3 to select a desired album..