Related Manuals for Reverso Outboard Flushing System 1.5
Summary of Contents for Reverso Outboard Flushing System 1.5
- Page 1 Manual Automatic Outboard Flushing System 1.5 Shown: Version 1.5 B with optional remote switch kit and optional inlet hose kit. Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
- Page 2 This page intentionally left blank.
-
Page 3: Table Of Contents
Table of Contents System Overview................4 Technical Specifications, Electrical, and Installation......5 Inlet Hose Kit ..................6 Remote Switch Kit ................7 Installation Diagram: 2 Engine Setup ..........8 Installation Diagram: 3 Engine Setup ..........9 Installation Diagram: 4 Engine Setup ..........10 Installation Diagram: 5 Engine Setup .......... -
Page 4: System Overview
3/8” or 1/2” hose barb - water outlet to engine Inlet hose kit (optional and available in various hose lengths) Remote switch kit (optional and available in various cable lengths) Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 5: Technical Specifications, Electrical, And Installation
Orientation: Any direction on a flat surface of the bulkhead or accessories compartment, except upsidedown. Electrical • Installation must include protection with 5A fuse or breaker (provided by installer). • ONLY CONNECT BLACK (-) AND RED (+) WIRES Capped fitting on the TO SAME RESPECTIVE COLOR. DAMAGE CAN Inlet Hose Kit Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 6: Inlet Hose Kit
When installing the inlet hose kit, do not turn water inlet hose barb. Only turn the collar of the valve to prevent damage to the o-ring seal. Water Inlet hose barb Collar of the valve Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 7: Remote Switch Kit
Version A is equipped with Delphi connector. Connect remote switch kit. Remote Switch Kit Version B Version B is equipped with Deutsch connector. Remove dust cover and connect remote switch kit. Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882... -
Page 8: Installation Diagram: 2 Engine Setup
Installation Diagram: 2 Engine Setup... -
Page 9: Installation Diagram: 3 Engine Setup
Installation Diagram: 3 Engine Setup... -
Page 10: Installation Diagram: 4 Engine Setup
Installation Diagram: 4 Engine Setup... -
Page 11: Installation Diagram: 5 Engine Setup
Installation Diagram: 5 Engine Setup... -
Page 12: Version A Dimensions: 2 Engine Setup
Version A Dimensions: 2 Engine Setup... -
Page 13: Version A Dimensions: 3 Engine Setup
Version A Dimensions: 3 Engine Setup... -
Page 14: Version A Dimensions: 4 Engine Setup
Version A Dimensions: 4 Engine Setup... -
Page 15: Version B Dimensions: 2 Engine Setup
Version B Dimensions: 2 Engine Setup... -
Page 16: Version B Dimensions: 3 Engine Setup
Version B Dimensions: 3 Engine Setup... -
Page 17: Version B Dimensions: 4 Engine Setup
Version B Dimensions: 4 Engine Setup... -
Page 18: Version B Dimensions: 5 Engine Setup
Version B Dimensions: 5 Engine Setup... -
Page 19: Operation And Troubleshooting
Confirm the correct fittings are installed for hose and unit. • Confirm correct voltage is powering the unit. • Ensure there is enough water pressure to the system. Version: 7/19/17 Reverso Pumps, Inc. www.reversopumps.com | contact@reversopumps.com | Ph: (954) 522-0882...
Need help?
Do you have a question about the Outboard Flushing System 1.5 and is the answer not in the manual?
Questions and answers
switch will not turn pump on
neither switch will turn on the pump for three engines