I-Tech CV-S101T Manual

CV-S101
USB CAT5 KVM Extender
Introduction:
CV-S101 is designed to control the PC, Server or KVM Switch up to 500
feet away from your Keyboard, Mouse and VGA monitor. The transmitter
(CV-S101T) is to synthesize the signals of USB keyboard, USB mouse,
and VGA monitor for being easily transmitted to a long distance over
popular Ethernet CAT5 cable. The receiver (CV-S101R) is to take the
synthetic signal and return it back to the signal s of USB keyboard, USB
mouse and VGA monitor respectively.
CV-S101 is a good solution for those noisy server room environment
where is unsuitable for people to work for a long time, besides, it
facilitates effective management on dispersive computers through one
dedicated central control room, demonstration room, meeting room, or at
your desk. CAT5 STP cable (Shielded Twisted Pair)/ UTP cable
(Unshielded Twisted Pair) or enhanced cable like CAT5E/CAT6 cable is
applied to LAN network popularly. CV-S101 uses the same existing
network construction to transfer local console signal to remote side.
CV-S101 allows you to move your console, i.e. Keyboard, Mouse and
VGA monitor, to a suitable place for centralized control conveniently over
LAN network. You just need to install a pair of extender, the transmitter
and receiver, into local side and remote side respectively. It also saves
your cable layout and installation cost.
Features:
Ø Compact desktop size
Ø Work with single PC, as well as the console port and PC port of KVM
Switch
Ø Work with CAT5, CAT5e, or CAT6 Ethernet cable
Ø Distance up to 500 feet
Ø Support standard 2-in-one KVM switch cable
Ø Easy to install and friendly to set up the video signal via adjustable
knobs.
Ø Compatible with DOS, MS Windows, Linux, Unix, and Netware
Ø No software required
Ø High VGA resolution up to 1280 X 1024 (CAT5 cable up to 500 feet
approximately)
Ø LED indications for Power on/off and data transmission
Technical specifications
Functions CV-S101T Transmitter
No. of USB Port – A Type
2
No. of USB Port- B Type 1
No. of VGA monitor port 2
No. of RJ-45 port 1
Console port connector USB A Type (x 2)
type (all female type) VGA blue HDDB 15 pin
PC port connector type USB B Type (x 1)
(all female type) VGA blue HDDB 15 pin
RJ-45 port connector 8P8C ( same as Ethernet 100BaseT port)
LED Power, Data
Knobs ( for VGA tuning ) No
Size Desktop
Power adapter DC12V, 1A
Weight (g) 0.5 kg
Dimension (mm) 112.5(L) x 86.5(W) x 35 (H) mm
Package contents
Model no.: KVM-CAT5U
Transmitter (CV-S101T) 1 pc
Receiver (CV-S101R) 1 pc
KVM 2-in-one cable 2 pcs
Power adapter DC12V, 1A (for Receiver) 1 pc
2-in-One Cable Diagram
USB Cable:
USB Type A to USB Type B
VGA Cable:
HDDB15 pin Male to Male
CAT5/5E/6 Straight Through STP (Shielded Twisted Pair) or UTP
(Unshielded Twisted Pair) Cable:
8P8C
Installation:
Before installation, please make sure to turn off all of the computers and
peripherals as well; and refer to the following instructions properly for
installation:
Adjust the knob on top of the receiver (CV-S101R) for optimal VGA
display quality, which varies according to the cable characteristic, such as
the length, category, and shielded or unshielded.
1. Extending your PC console up to 500 feet away:
CV-S101R
Receiver
2
1
2
1
USB A Type (x 2)
VGA blue HDDB 15 pin
USB B Type (x 1)
VGA blue HDDB 15 pin
PC1,PC2
1
Desktop
DC12V, 1A
0.5 kg
117.5(L) x 81(W) x 40 (H) mm
1.1. Connect the console ports of PC to the transmitter's (CV-S101T) "PC
port" with standard 2-in-one KVM switch cable (male to male).
1.2. Connect the other PC's console ports to the receiver's (CV-S101R)
"PC port" with standard 2-in-one KVM switch cable (male to male).
1.3. Connect the transmitter and receiver of CV-S101 through their RJ-45
connecters with a CAT5 cable.
1.4. Connect Keyboard, Mouse, and Monitor to the transmitter's "Console
Port."
1.5. Connect Keyboard, Mouse, and Monitor to the receiver's "Console
Port."
2. Extending console port or PC port of KVM Switch up to 500 feet
away
2.1. Connect console ports of the KVM switch to the transmitter's
(CV-S101T) "PC Port" with a standard 2-in-one KVM switch cable
(male to male).
2.2. Connect PC console ports to the receiver's (CV-S101R) "PC Port"