Nokta Detectors GREEN EDITION Quick Start Manual

2.4 GHz WIRELESS
HEADPHONES GREEN EDITION
IMPORTANT! FOR OPTIMAL PERFORMANCE, BE SURE THAT THE
HEADPHONES' BLUE LED AND THE DETECTOR ARE ON THE SAME SIDE!
Pairing Instructions for SIMPLEX+
1. MAKE SURE YOUR DETECTOR IS ON!
2. While pressing the white button on the headphones, switch the on-off button of the
headphones to ''on'' position and do NOT let go of the white button until the beep indicating
the battery status is heard.
3. Headphones will emit a number of beeps to indicate the battery status as follows: Five
(5) beeps for fully charged battery, four (4), three (3), two (2) beeps to indicate diminishing
charge and one (1) beep if the battery is low. When the battery is approaching full depletion,
the headphones will start emitting continuous beeps at short intervals indicating an
immediate need to charge the battery.
IMPORTANT! Disconnection and unpairing may occur when the battery is low!
4. The blue LED on the other side will start blinking every 2 seconds.
5. Press the plus (+) and minus (-) buttons on your detector at the same time. A high beep
will be heard.
6. The blue LED on the headphones will start to blink every second, the wireless icon will
appear on screen and the wireless headphones will pair with the detector.
7. Once the pairing is complete, the headphones and the detector will connect automatically
at the next start-up.
8. Once the pairing is successful, if you experience any distortion in the audio or
interference from another detector, change the channel by select the wireless connection
setting on your detector and using the plus (+) and minus (-) buttons. Channels will change
between 1-5. At 0 position, the wireless connection is off. When you are not using the
wireless headphones, keeping the wireless setting at 0 position is recommended.
9. To adjust the volume, use the volume setting of the detector.