Walmart WMBR-1 User Manual

Table of Contents

Download this manual

Walmart WiFi Bridge WMBR-1 User Manual

WARNING

Read, keep and follow these instructions.



Heed all warnings.



Clean only with a dry cloth.



Do not install near any heat sources as radiator, heat registers, stoves and other apparatus (including



amplifiers) that produce heat.

Disconnect the power adapter or any other connected peripherals if any of the following conditions exist:

The power cable or connector is damaged or frayed.



You want to clean the WiFi Bridge



The WiFi Bridge or attached cables are exposed to rain, water/fluids, or excessive moisture.



The WiFi Bridge or its power adapter is damaged or has been dropped and you suspect it needs to



be serviced.

WARNING: No user-serviceable parts inside. Refer all servicing to qualified service personnel.

IMPORTANT CONSUMER INFORMATION: Please read before activating or using the device.

Table of Contents

Do you have a question about the WMBR-1 and is the answer not in the manual?

Page 1 Walmart WiFi Bridge WMBR-1 User Manual WARNING Read, keep and follow these instructions.  Heed all warnings.  Clean only with a dry cloth.  Do not install near any heat sources as radiator, heat registers, stoves and other apparatus (including ...
Page 2 WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity. For more information please call 1-833-235-2111 Information for the user This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 3 This will take you to the settings page where you can initiate changing the wireless network. Z-W AVE FUNCTIONALITY AND ADVANCED FEATURES The Walmart Bridge is a Z-Wave certified central static controller. It is a security enabled Z-Wave product.
Page 4 Any devices that are not on the supported device list may not work properly with the Walmart bridge. To factory reset the hub, which will also factory reset and delete all Z-Wave network information, press and hold the button on the back of the bridge for 20 seconds.