Page 1
Utility Sink Adapter • Provides a quick, non-permanent connection to a hose, laundry sink faucet, or fittings with similar threads. Faucet • Provides a quick connect fitting for Diverter the RO/DI tubing. Valve Compression Video Set-up and Install Instructions: brs.li/howtoro...
Page 2
SYSTEM SET-UP PUSH CONNECT FITTINGS It may be necessary to connect or remove RO tubing from fittings. Illustrations below show how to perform these actions. Remove Push Connect Tubing Connect Push Connect Tubing Hold round retention ring tightly against Firmly push one end of tube into fitting. fitting then pull tubing away while It’s important to push tubing all the twisting.
Page 3
100 GPD System: Dow FilmTec 100 GPD (SKU 200133) is recommended. 150 GPD System: Dow FilmTec 75 GPD (SKU 200051 x 2) BRS 1 Micron Universal Carbon Block (SKU 208657) 200 GPD System: Dow FilmTec 100 GPD (SKU 200133 x 2) PLUS SYSTEM FEATURES Get the most out of your RO/DI system and keep tabs on filter performance with these helpful features.
Page 4
FREQUENTLY ASKED QUESTIONS Q: Is it normal for the DI stage to not fill completely with water? A: Yes, air gets trapped in the top of the canister and has no way to escape. This does not interfere with system performance, but if desired open the canister slightly while the unit is running to allow the air to escape.