Advertisement
Quick Links
Advertisement
Summary of Contents for Rainbow Colour Changers Micro Series
- Page 1 Power Supply Units (PSU) – Short Reference...
- Page 2 The surface of the device may heat up due to the luminaire used. Please let the scroller cool down before touching it. Rainbow Colour Changers GmbH disclaims all liability for damage to the fitting or to other property or persons deriving from installation, use and maintenance that have not been carried out in conformity with this instructions manual, which must always accompany the fitting.
- Page 3 General: No matter if fixed installation or touring business – complex lighting systems always require best reliability together with relatively easy operation and maintenance features. In order to be able to solve eventually occurring problems not only fast but also most efficiently, it is important to know which component of the system fulfils which purpose.
- Page 4 Termination: If the Rainbow PSU is the last unit in line (of DMX cabling), the DMX signal must be terminated. Therefore you will find a termination switch on the unit. If the termination switch is set to ON, the Micro PSU indicates this by the yellow LED and the MAXI 4 PSU by the flashing red LED.
- Page 5 Power/Data cable: In order to guarantee a reliable operation, we strongly recommend the use of our Rainbow Power/Data cable. This XLR4 pole cable contains two lines á 0,38 sqmm for the transmission of the DMX signals, as well as two lines á 2,08 sqmm for the supply voltage of the Colour Changers. The high cross-section of the live wired lines considerably increases the maximum cable length, which you can use within the system.
- Page 6 Specification Micro PSU: Technical data Micro PSU RCC141 Height 178 mm / 7″ Width 143 mm / 5.6″ Depth 72 mm / 2.8″ Weight 1.37 kg / 3 lbs Connectors – Out to scrollers XLR - 4 pin - F Connectors –...
- Page 7 Specification Maxi 4 PSU: Technical data Maxi PSU RCC125E/U Height 293 mm / 11.5″ Width 82 mm / 3.25″ Depth 250 mm / 9.9″ Weight 3.3 kg / 7.3 lbs Connectors – Out to scrollers XLR - 4 pin - F Connectors –...