Running The Board (Jade-L And Emerald-L) - Fujitsu SK-86R03-VIDEO User Manual

3 Running the board (Jade-L and Emerald-L)

Before powering up the board, please ensure that all multiplex modes are set correct and all
interfaces connected accordingly.
set board switches appropriate to the desired function
( SW1 + SW2 can be used to trigger the DVI signal on falling/rising edge of the clock
signal), check schematic for more information
connect addon board on the baseboard
connect power supply
power indicating LEDS should light up
Figure 3-1: Running Emerald-L Board
um-mb86r03-video-rev1-0
Video Addon Board
SK-86R03-VIDEO
- 10 - © Fujitsu Semiconductor Europe GmbH