Advertisement
Quick Links
CLEARING THE BARREL
Rotate the Speed Control Knob counter clockwise until the Auger stops.
Open the Clamp Lock and raise the Barrel Assembly so the Inlet is out
of the chocolate in the Tempering Bowl.
Move the Direction Switch on the Power Supply to "reverse", and restart
the motor by rotating the Speed Control Knob. Residual Chocolate will
be returned to the Tempering Bowl.
CLEANING
Unplug the Power Supply from the Motor Assembly and lift the
Open the Clamp, remove the Barrel and Auger, and move these to the
cleaning area.
Remove the Auger from the Barrel.
Grip the Barrel and unscrew the Inlet and Discharge by rotating them
Clean the Barrel, Inlet and Discharge with a sti brush, and screw
back together when dry. Note: Barrel, Inlet, and Discharge are not
dishwasher safe. Cleaning these parts in a dishwasher will warp
them and void your warranty.
IMPORTANT: Components must be thoroughly dry before
reuse to prevent contamination of the chocolate.
REPLACEMENT PARTS
Clamp Assembly 5/10-
Motor Assembly-
Barrel Assembly-
Auger-
Power Supply with Speed Control and Chord-
Clamp Assembly 30-
ChocoVision Corp.
14 Catharine St., Poughkeepsie, NY 12601
Phone: (800) 324-6252 Fax: (845) 473-8004
chocovision.com
8AS-1003-001
8AS-1001-001
8AS-1002-001
8PL-1008-001
8EL-1001-001
8AS-1005-001
ChocoVision
Chocolate Dispenser
Advertisement
Summary of Contents for ChocoVision Chocolate Dispenser
- Page 1 Open the Clamp Lock and raise the Barrel Assembly so the Inlet is out of the chocolate in the Tempering Bowl. Chocolate Dispenser Move the Direction Switch on the Power Supply to “reverse”, and restart the motor by rotating the Speed Control Knob. Residual Chocolate will be returned to the Tempering Bowl.
- Page 2 Knob Motor Drive Dove Coupler Tail Clamp Assembly Metal Clip Auger Fig.4 Rail Clamp Speed Control Lock Fig.6 Knob Fig.5 Fig.1 Direction Switch Power Supply INSTALLATION AND SET UP Barrel Attach the Clamp Assembly to the Tempering Machine Assembly Fig.2 pushing the inside of the Clip against the Rail, and tightening Discharge The discharge end of the Barrel Assembly can be rotated to dispense on either side...