Insignia NS-MA5FMT2-C Quick Setup Manual

QUICK SETUP GUIDE
FM Transmitter with
Lightning™ Connector
NS-MA5FMT / NS-MA5FMT-C / NS-MA5FMT2-C

PACKAGE CONTENTS

• FM transmitter
• Quick Setup Guide

FEATURES

• Lightning™ connector works with your iPhone, iPad,
and iPod
• Plays music from your iPhone, iPad, or iPod on your
car's FM radio
• Auto-scan quickly finds unused stations
• Buttons easily control your transmitter
Before using your new product, please read these instructions to prevent any damage.

SETTING UP YOUR TRANSMITTER

1 Plug the car adapter into your vehicle's cigarette lighter
receptacle. Your transmitter turns on.
2 Set the desired volume level on your iOS device.
Note: Volume level cannot be adjusted once your iOS device has
been plugged into the Lightning connector.
3 Connect the Lightning connector to your iPhone, iPad, or iPod.

TUNING YOUR TRANSMITTER

You can tune your transmitter manually, automatically, or with
saved presets.
Screen
Memory preset button
Frequency tuner
Lightning™
connector

Manually tuning your transmitter

1 Tune your vehicle's radio to a weak or unused FM frequency.
You should hear static.
2 Press and hold M (on the transmitter), then press – or + to
tune your transmitter to the same frequency as your radio.
The frequency is shown on the screen.

Automatically tuning your transmitter

1 Press and hold Scan. Your transmitter automatically selects
a weak or unused frequency.
2 Tune your radio to the same frequency as your transmitter
(read the frequency off the display screen).

Using memory presets

• Press the  or  button to choose a previously saved
memory preset. See "SAVING MEMORY PRESETS" for more
information.
Scan
button

SAVING MEMORY PRESETS

1 Press  or  button to the Memory Preset you want (M1,
M2, M3).
2 Press M to enter manual tuning mode and see the Memory
Car adapter
number flashing.
3 Press  or  button to tune the transmitter to the
frequency that you want to save.
4 Press M to save the frequency to the corresponding number.