MOUNTING INSTRUCTIONS
UDC-1300-S2
UDC-1000-S2
© Leuze electronic GmbH + Co. KG, In der Braike 1, 73277 Owen, Germany, Phone: +49 (0) 7021/573-0, Fax: -199, info@leuze.de,
MONTAGEANWEISUNG
GERÄTESÄULE UDC / DC FÜR MEHRSTRAHL-
SICHERHEITS-LICHTSCHRANKEN UND LICHTVORHÄNGE
UDC / DC Komponenten (im Lieferumfang enthalten):
UDC-yy00-S2
DC-yy00-S2
MS-UDC/UMC-S2
Fix-Anker W-FA/S
Klemmhalterung BT-P40
Bohrschablone
HINWEIS:
Befolgen Sie sorgfältig alle Hinweise zum Sicherheits-Sensor in
der Original Betriebsanleitung auf der beiliegenden CD-ROM.
Montageschritte (Step):
1. Säulen am Boden befestigen
2. Säulen ausrichten
3. Sicherheits-Sensor montieren
4. Sicherheits-Sensor ausrichten und in Betrieb nehmen
5. Schutzscheibe einfügen (optional)
6. Checkliste – Vor der ersten Inbetriebnahme bearbeiten (siehe
Original Betriebsanleitung des Sicherheits-Sensors)
Erforderliche Werkzeuge:
Inbusschlüssel-Satz
Sechskantschlüssel-Satz
Wasserwaage
Bohrhammer mit 10 mm Betonbohrer
Hammer
DC-900-S2
DE
MOUNTING INSTRUCTIONS
UDC / DC DEVICE COLUMN FOR MULTIPLE LIGHT BEAM
SAFETY DEVICES AND LIGHT CURTAINS
UDC / DC components (included in delivery):
UDC-yy00-S2
DC-yy00-S2
MS-UDC/UMC-S2
Fastening anchor W-FA/S
BT-P40 clamp bracket
Drilling template
NOTE:
Carefully follow all notices regarding the safety sensor
in the original operating instructions on the enclosed CD-ROM.
Mounting steps:
1. Fasten the columns on the floor
2. Adjust columns
3. Mounting the safety sensor
4. Align and start up safety sensor
5. Insert protective screen (optional)
6. Edit Checklist – before the initial start-up (see original
operating instructions of the safety sensor)
Necessary tools:
Allen key set
Hexagon wrench set
Spirit level
Hammer drill with 10 mm concrete bit
Hammer
www.leuze.com
We reserve the right to make changes
EN
2012/06 Art. no. 700050