Table of Contents
Advertisement
Environmental protection/disposal
6
Environmental protection/disposal
Environmental protection is a fundamental corporate strategy
of the Bosch Group.
The quality of our products, their economy and environmental
safety are all of equal importance to us and all environmental
protection legislation and regulations are strictly observed.
We use the best possible technology and materials for
protecting the environment taking account of economic
considerations.
Packaging
Where packaging is concerned, we participate in country-
specific recycling processes that ensure optimum recycling.
All of our packaging materials are environmentally compatible
and can be recycled.
Used appliances
Used appliances contain valuable materials that can be
recycled.
The various assemblies can be easily dismantled. Synthetic
materials are marked accordingly. Assemblies can therefore be
sorted by composition and passed on for recycling or disposal.
Old electrical and electronic appliances
This symbol indicates that the product must not be
disposed of with other waste, but be taken to the
waste collection centers for treatment, collection,
recycling and disposal procedure.
The symbol applies to countries with electronic
waste regulations, for example the European Waste Electrical
and Electronic Equipment Directive 2012/19/EU. These
regulations determine the framework for the return and
recycling of used electronic appliances as applicable within
each country.
As electronic equipment may contain hazardous substances, it
needs to be recycled responsibly in order to minimize any
potential harm to the environment and human health.
Furthermore, recycling of your electronic waste will help to
conserve natural resources.
For additional information on the environmentally safe disposal
of electrical and electronic equipment, please contact the
relevant local authorities, your household waste disposal
service or the retailer where you purchased the product.
For additional information, please visit:
www.weee.bosch-thermotechnology.com/
8
7
Operation
7.1
MT20 overview
1
4
Fig. 8
MT20 overview
1
Outer ring with tappets
(Each tappet represents 15
minutes)
ON timed periods
•
OFF timed periods
•
2
Current time arrow
(shows the current time)
3
Mode select
ON
Mode select
Timed - automatically switches
between on and off periods
according to tappet settings on outer
ring.
Mode select
OFF
4
ON tappet example
(moved towards the centre)
OFF tappet example
(moved towards outer)
Table 3
Overview descriptions
MT20 Wired Timer – 6 720 882 947 (2019/07)
2
3
Move tappets to inside edge of
outer ring for desired period.
Move tappets to outside edge of
outer ring for desired period.
- Quick Links:
- Operation
Hide quick links:
Advertisement
Table of Contents
