1. Manuals
  2. Brands
  3. Texim Europe Manuals
  4. Single board computers
  5. GENE-BT05
  6. Manual

Texim Europe GENE-BT05 Manual

Subcompact board
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S u b C o m p a c t B o a r d
G E N E - B T 0 5
GENE-BT05
®
®
Intel
Celeron
N2930/N2807
Processor
With LVDS
10/100/1000Base-TXEthernet
2 Mini Card, LPC
1 USB3.0, 3 USB2.0, 4 COM
2CH HD Audio
st
GENE-BT05 Manual Rev. A 1
Ed.
June 19, 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GENE-BT05 and is the answer not in the manual?

Questions and answers

Summary of Contents for Texim Europe GENE-BT05

  • Page 1 G E N E - B T 0 5 GENE-BT05 ® ® Intel Celeron N2930/N2807 Processor With LVDS 10/100/1000Base-TXEthernet 2 Mini Card, LPC 1 USB3.0, 3 USB2.0, 4 COM 2CH HD Audio GENE-BT05 Manual Rev. A 1 June 19, 2014...
  • Page 2 S u b C o m p a c t B o a r d G E N E - B T 0 5 Copyright Notice This document is copyrighted, 2014. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.
  • Page 3 S u b C o m p a c t B o a r d G E N E - B T 0 5 Acknowledgments All other products’ name or trademarks are properties of their respective owners.  AMI is a trademark of American Megatrends Inc. ...
  • Page 4 Before you begin installing your card, please make sure that the following materials have been shipped:  GENE-BT05 CPU Card  DVD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please...

  • Page 5: Table Of Contents

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Contents Chapter 1 General Information 1.1 Introduction ..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 S u b C o m p a c t B o a r d G E N E - B T 0 5 2.17 LVDS Port Inverter / Backlight Connector (CN3) ..2-15 2.18 +5V Output for SATA HDD (CN4) ......2-16 2.19 External +5VSB Input (CN5) ........
  • Page 7 S u b C o m p a c t B o a r d G E N E - B T 0 5 2.42 VGA Port (CN30) ............. 2-40 2.43 Battery (CN31) ............2-41 2.44 CFast Slot (CN33) ........... 2-41 2.45 DDR3L SO-DIMM Slot (CN34) ........
  • Page 8 S u b C o m p a c t B o a r d G E N E - B T 0 5 Appendix D Electrical Specifications for I/O Port D.1 Electrical Specifications for I/O Port ..... D-2...

  • Page 9: Chapter 1 General Information

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 10: Introduction

    Three USB2.0, one USB3.0, four COM Ports (two RS-232, two RS-232/422/485) and 8-bit digital I/O are configured on the GENE-BT05 as well. Full functions make GENE-BT05 a flexible and user friendly solution. This brand new SubCompact board is developed to cater to the requirements of Automation, Medical, ticket machine, transportation, gaming, KIOSK, and POS/POI applications.

  • Page 11: Features

    S u b C o m p a c t B o a r d G E N E - B T 0 5 1.2 Features  Onboard Intel® Celeron® N2930/N2807 Processor  DDR3L 1066/1333MHz SODIMM x 1, Up to 8 GB ...

  • Page 12: Specifications

    S u b C o m p a c t B o a r d G E N E - B T 0 5 1.3 Specifications System ®  Processor Intel Celeron N2930/N2807 Processor  System Memory 204-pin DDR3L 1066/1333 MHz SODIMM x 1, up to 8GB ...
  • Page 13 S u b C o m p a c t B o a r d G E N E - B T 0 5 Requirement  Board Size 5.75" x 4" (146mm x 101.6mm)  Gross Weight 0.88 lb (0.4 kg) ...
  • Page 14 S u b C o m p a c t B o a r d G E N E - B T 0 5 flow) x 2  USB3.0 x 1, USB2.0 x 3  PS/2 Port Keyboard x 1, Mouse x 1 ...

  • Page 15: Chapter 2 Quick Installation Guide

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Chapter Quick Installation Guide Chapter 2 Quick Installation Guide...

  • Page 16: Safety Precautions

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 17: Location Of Connectors And Jumpers

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.2 Location of Connectors and Jumpers Component Side Chapter 2 Quick Installation Guide...
  • Page 18 S u b C o m p a c t B o a r d G E N E - B T 0 5 Solder Side Chapter 2 Quick Installation Guide...

  • Page 19: Mechanical Drawing

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.3 Mechanical Drawing Component Side Chapter 2 Quick Installation Guide...
  • Page 20 S u b C o m p a c t B o a r d G E N E - B T 0 5 Solder Side Chapter 2 Quick Installation Guide...

  • Page 21: List Of Jumpers

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 22: List Of Connectors

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 23 S u b C o m p a c t B o a r d G E N E - B T 0 5 CN24 CPU FAN (Optional) CN25 USB Ports 0 and 1 CN26 LAN (RJ-45) Port1 CN27 LAN (RJ-45) Port2 CN28 COM Port 1 (D-SUB 9) CN29...

  • Page 24: Setting Jumpers

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 25: Lvds Port Backlight Inverter Vcc Selection (Jp1)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.7 LVDS Port Backlight Inverter VCC Selection (JP1) 1 2 3 1 2 3 +12V +5V (Default) Function +12V +5V (Default)

  • Page 26: Com2 Pin8 Function Selection (Jp8)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.10 COM2 Pin8 Function Selection (JP8) +12V Ring(Default) Function +12V Ring(Default) 2.11 COM3 Pin8 Function Selection (JP9) +12V Ring(Default) Function...

  • Page 27: Front Panel Connector (Jp19)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 JP17 Function Disable Enable (Default) Note 1: Disable Auto Power Button JP17(1-2) : Need to use power button JP19(1-2) to power on the system.

  • Page 28: Touch Screen 4,5,8 Wire Selection (Jp20)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.14 Touch Screen 4,5,8 Wire Selection (JP20) 1 2 3 1 2 3 4/8 Wires Mode (Default) 5 Wires Mode JP20 Function...

  • Page 29: Lvds Port Inverter / Backlight Connector (Cn3)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Pin Name Signal Type Signal Level SMB_DATA +3.3V SMB_CLK +3.3V PS_ON# +3.3V +5VSB 2.17 LVDS Port Inverter / Backlight Connector (CN3) BLK_PWR BKL_CONTROL BKL_ENABLE...

  • Page 30: Output For Sata Hdd (Cn4)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.18 +5V Output for SATA HDD (CN4) Pin Name Signal Type Signal Level 2.19 External +5VSB Input (CN5) PS_ON# +5VSB Pin Name...

  • Page 31: External +12V Input (Cn7)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 SATA_TX+ DIFF SATA_TX- DIFF SATA_RX- DIFF SATA_RX+ DIFF 2.21 External +12V Input (CN7) +12V GND Pin Name Signal Type Signal Level +12V...
  • Page 32 S u b C o m p a c t B o a r d G E N E - B T 0 5 Pin Name Signal Type Signal Level BKL_ENABLE BKL_CONTROL LCD_PWR +3.3V/+5V LVDS_A_CLK- DIFF LVDS_A_CLK+ DIFF LCD_PWR +3.3V/+5V LVDS_DA0- DIFF LVDS_DA0+...

  • Page 33: Audio I/O Port (Cn9)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 LVDS_DB2+ DIFF LVDS_DB3- DIFF LVDS_DB3+ DIFF LCD_PWR +3.3V/+5V LVDS_B_CLK- DIFF LVDS_B_CLK+ DIFF Note: LVDS LCD_PWR can be set to +3.3V or +5V by JP4. 2.23 Audio I/O Port (CN9) MIC_L MIC_R...

  • Page 34: Mini-Card Slot (Half-Mini Card) (Cn10)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 LEFT_OUT GND_AUDIO RIGHT_OUT +5V_AUDIO 2.24 Mini-Card Slot (Half-Mini Card) (CN10) Pin Name Signal Type Signal Level PCIE_WAKE# +3.3VSB +3.3V...
  • Page 35 S u b C o m p a c t B o a r d G E N E - B T 0 5 W_DISABLE# +3.3V PCIE_RST# +3.3V PCIE_RX- DIFF +3.3VSB +3.3V PCIE_RX+ DIFF +1.5V +1.5V SMB_CLK +3.3V PCIE_TX- DIFF SMB_DATA +3.3V PCIE_TX+...

  • Page 36: Lpc Port (Cn11)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 +1.5V +1.5V +3.3VSB +3.3V Note 1: CN10 can be selected for Mini-Card or mSATA by changing BOM. Note 2: You can choose the function either from mSATA or from CFast on the motherboard.

  • Page 37: Com Port 2 (Cn12)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Pin Name Signal Type Signal Level LAD0 +3.3V LAD1 +3.3V LAD2 +3.3V LAD3 +3.3V +3.3V +3.3V LFRAME# LRESET# +3.3V...
  • Page 38 S u b C o m p a c t B o a r d G E N E - B T 0 5 Pin Name Signal Type Signal Level ±5V ±5V ±5V RI/+5V/+12V IN/ PWR +5V/+12V RS-485 RS485_D- RS485_D+ NC/+5V/+12V Pin Name Signal Type...
  • Page 39 S u b C o m p a c t B o a r d G E N E - B T 0 5 NC/+5V/+12V +5V/+12V RS-422 RS422_TX- RS422_TX+ RS422_RX+ RS422_RX- NC/+5V/+12V Pin Name Signal Type Signal Level RS422_TX- ±5V RS422_TX+ ±5V RS422_RX+...

  • Page 40: Lpt Port (Cn13)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.27 LPT Port (CN13) DIO Mode STROBE# AFD# ERROR# DIO0 PRINT# DIO1 SLIN# DIO2 DIO3 ACK# DIO7 BUSY DIO6...

  • Page 41: Com Port 3 (Cn14)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 ACK# BUSY SLCT 2.28 COM Port 3 (CN14) RS-232 RI/+5V/+12V Pin Name Signal Type Signal Level 2-27 Chapter 2 Quick Installation Guide...
  • Page 42 S u b C o m p a c t B o a r d G E N E - B T 0 5 ±5V ±5V ±5V RI/+5V/+12V IN/ PWR +5V/+12V RS-485 RS485_D- RS485_D+ NC/+5V/+12V Pin Name Signal Type Signal Level RS485_D- ±5V RS485_D+...
  • Page 43 S u b C o m p a c t B o a r d G E N E - B T 0 5 RS-422 RS422_TX- RS422_TX+ RS422_RX+ RS422_RX- NC/+5V/+12V Pin Name Signal Type Signal Level RS422_TX- ±5V RS422_TX+ ±5V RS422_RX+ RS422_RX- NC/+5V/+12V...

  • Page 44: Com Port 4 (Cn15)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.29 COM Port 4 (CN15) Pin Name Signal Type Signal Level ±9V ±9V ±9V 2.30 Digital IO Port (CN16) DIO0 DIO1 DIO2...

  • Page 45: Usb 2.0 Port 3 (Cn17)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Pin Name Signal Type Signal Level DIO0 DIO1 DIO2 DIO3 DIO4 DIO5 DIO6 DIO7 2.31 USB 2.0 Port 3 (CN17) +5VSB USB3_D- USB3_D+...

  • Page 46: Usb 2.0 Port 2 (Cn18)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.32 USB 2.0 Port 2 (CN18) +5VSB USB2_D- USB2_D+ Pin Name Signal Type Signal Level +5VSB USB2_D- DIFF USB2_D+...

  • Page 47: Ps/2 Keyboard/Mouse Combo Port (Cn22)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.34 PS/2 Keyboard/Mouse Combo Port (CN22) KB_DATA KB_CLK +5VSB MS_CLK MS_DATA Pin Name Signal Type Signal Level KB_ DATA KB_CLK +5VSB...
  • Page 48 S u b C o m p a c t B o a r d G E N E - B T 0 5 Pin Name Signal Type Signal Level TOP EXCITE BOTTOM EXCITE LEFT EXCITE RIGHT EXCITE TOP SENSE BOTTOM SENSE LEFT SENSE RIGHT SENSE...
  • Page 49 S u b C o m p a c t B o a r d G E N E - B T 0 5 4 Wires 5 Wires UL(Y) BOTTOM UR(H) LEFT LL(L) RIGHT LR(X) SENSE(S) Pin Name Signal Type Signal Level UL(Y) UR(H)

  • Page 50: Cpu Fan (Optional) (Cn24)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.36 CPU FAN (Optional) (CN24) FAN_TAC FAN_POWER Pin Name Signal Type Signal Level FAN_POWER +12V FAN_TAC 2.37 USB Ports 0 and 1 (CN25) Port 1 11 12 13...

  • Page 51: Lan (Rj-45) Port1 (Cn26)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 USB0_SSRX+ DIFF USB0_SSTX− DIFF USB0_SSTX+ DIFF +5VSB USB1_D- DIFF USB1_D+ DIFF Note: Only Port0 supports USB3.0. 2.38 LAN (RJ-45) Port1 (CN26) ACT/LINK SPEED...

  • Page 52: Lan (Rj-45) Port2 (Cn27)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 MDI1+ DIFF MDI2+ DIFF MDI2- DIFF MDI1- DIFF MDI3+ DIFF MDI3- DIFF 2.39 LAN (RJ-45) Port2 (CN27) ACT/LINK SPEED Pin Name...

  • Page 53: Com Port 1 (D-Sub 9) (Cn28)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.40 COM Port 1 (D-SUB 9) (CN28) Pin Name Signal Type Signal Level ±9V ±9V ±9V Note: COM port1 can be selected for D-SUB9 or Wafer BOX connector (CN20) 2.41 HDMI Port (CN29) Pin Name...

  • Page 54: Vga Port (Cn30)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 TMDS_DAT2- DIFF TMDS_DAT1+ DIFF TMDS_DAT1- DIFF TMDS_DAT0+ DIFF TMDS_DAT0- DIFF TMDS_CLK+ DIFF TMDS_CLK- DIFF DDC_CLK DDC_DATA HPLG_DETECT 2.42 VGA Port (CN30) Pin Name...

  • Page 55: Battery (Cn31)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 GREEN BLUE RED_GND_RTN GREEN_GND_RTN BLUE_GND_RTN CRT_PLUG# DDC_DATA HSYNC VSYNC DDC_CLK 2.43 Battery (CN31) Pin Name Signal Type Signal Level +3.3V 3.3V...
  • Page 56 S u b C o m p a c t B o a r d G E N E - B T 0 5 SATA_TX- DIFF SATA_RX- DIFF SATA_RX+ DIFF PC10 PC11 PC12 PC13 +3.3V +3.3V PC14 +3.3V +3.3V PC15 PC16 PC17 2-42...

  • Page 57: Ddr3L So-Dimm Slot (Cn34)

    S u b C o m p a c t B o a r d G E N E - B T 0 5 2.45 DDR3L SO-DIMM Slot (CN34) Standard specification 2.46 UIM Card Socket (CN35) Pin Name Signal Type Signal Level UIM_PWR UIM_RST...
  • Page 58 S u b C o m p a c t B o a r d G E N E - B T 0 5 PCIE_REF_CLK- DIFF UIM_CLK PCIE_REF_CLK+ DIFF UIM_RST UIM_VPP W_DISABLE# +3.3V PCIE_RST# +3.3V PCIE_RX- DIFF +3.3VSB +3.3V PCIE_RX+ DIFF +1.5V +1.5V...
  • Page 59 S u b C o m p a c t B o a r d G E N E - B T 0 5 USB_D- DIFF USB_D+ DIFF +3.3VSB +3.3V +3.3VSB +3.3V +1.5V +1.5V +3.3VSB +3.3V 2-45 Chapter 2 Quick Installation Guide...
  • Page 60 S u b C o m p a c t B o a r d G E N E - B T 0 5 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅 汞...
  • Page 61 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chapter BIOS Setup Chapter 3 AMI BIOS Setup 3-1...

  • Page 62: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The GENE-BT05 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it runs down.

  • Page 63: Ami Bios Setup

    S u b C o m p a c t B o a r d G E N E - B T 0 5 3.2 AMI BIOS Setup AMI BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 64 S u b C o m p a c t B o a r d G E N E - B T 0 5 Setup Menu Setup submenu: Main Press ‘Delete’ Key to enter Setup Chapter 3 AMI BIOS Setup 3-4...
  • Page 65 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced Chapter 3 AMI BIOS Setup 3-5...
  • Page 66 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Power Management Options summary: Power Mode ATX Type Optimal Default, Failsafe Default AT Type Select power supply mode Restore AC Last State...
  • Page 67 S u b C o m p a c t B o a r d G E N E - B T 0 5 Auto Disable Optimal Default, Failsafe Default Configuration Enables or Disables BIOS ACPI Auto Configuration Enable Enable Optimal Default, Failsafe Default Hibernation Disable...
  • Page 68 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Power Management -> S5 RTC Wake Settings Options summary: Wake system with Fixed Time Enable Disable Optimal Default,...
  • Page 69 S u b C o m p a c t B o a r d G E N E - B T 0 5 Wake up minute increase Select RTC wake mode Chapter 3 AMI BIOS Setup 3-9...
  • Page 70 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Super IO Configuration Chapter 3 AMI BIOS Setup 3-10...
  • Page 71 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Super IO Configuration Serial Port 1 Configuration Chapter 3 AMI BIOS Setup 3-11...
  • Page 72 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Super IO Configuration Serial Port 2 Configuration Chapter 3 AMI BIOS Setup 3-12...
  • Page 73 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Super IO Configuration Serial Port 3 Configuration Chapter 3 AMI BIOS Setup 3-13...
  • Page 74 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Super IO Configuration Serial Port 4 Configuration Chapter 3 AMI BIOS Setup 3-14...
  • Page 75 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Super IO Configuration Parallel Port Configuration Options summary: Serial Port Disabled Enabled Default Allows BIOS to En/Disable correspond serial port. Change Settings Auto Default...
  • Page 76 S u b C o m p a c t B o a r d G E N E - B T 0 5 IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Allows BIOS to Select Serial Port resource. Change Settings Auto Default (Serial Port 2) IO=2F8h;...
  • Page 77 S u b C o m p a c t B o a r d G E N E - B T 0 5 (Serial Port 4) IO=2E8h; IRQ=7; IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12; IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12; IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12; Allows BIOS to Select Serial Port resource. Smart Fan Function Enable Disable...
  • Page 78 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Smart Fan Options summary: Fan 1 Smart Fan Control Manual RPM Mode Manual Duty Mode Auto RPM Mode Auto Duty-Cycle Optimal Default,...
  • Page 79 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Digital IO Options summary: Type Output Input Help for Digital IO Level Help for Digital IO Chapter 3 AMI BIOS Setup 3-19...
  • Page 80 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> H/W Monitor Chapter 3 AMI BIOS Setup 3-20...
  • Page 81 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> CPU Configuration Options summary: Intel Virtualization Disabled Technology Enabled Optimal Default, Failsafe Default When enabled, a VMM can utilize the additional hardware capabilities provided by Vander pool Technology Chapter 3 AMI BIOS Setup 3-21...
  • Page 82 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> CPU Configuration Socket 0 CPU Information Chapter 3 AMI BIOS Setup 3-22...
  • Page 83 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> SATA Configuration Options summary: SATA Mode Default AHCI IDE: Configure SATA controllers as legacy IDE AHCI: Configure SATA controllers to operate in AHCI mode En/Disable SATA Port Chapter 3 AMI BIOS Setup 3-23...
  • Page 84 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> CSM Configuration Chapter 3 AMI BIOS Setup 3-24...
  • Page 85 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Trusted Computing Chapter 3 AMI BIOS Setup 3-25...
  • Page 86 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> USB Configuration Options summary: Legacy USB Support Enabled Optimal Default, Failsafe Default Disabled Auto Enables BIOS Support for Legacy USB Support.
  • Page 87 S u b C o m p a c t B o a r d G E N E - B T 0 5 Floppy Forced FDD Hard Disk CDROM If Auto. USB devices less than 530MB will be emulated as Floppy and remaining as Floppy and remaining as hard drive.
  • Page 88 S u b C o m p a c t B o a r d G E N E - B T 0 5 Advanced -> Touch Device Options summary: Touch Device Enabled Optimal Default, Failsafe Default Disabled Chapter 3 AMI BIOS Setup 3-28...
  • Page 89 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chipset Chapter 3 AMI BIOS Setup 3-29...
  • Page 90 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chipset -> Host Bridge Chapter 3 AMI BIOS Setup 3-30...
  • Page 91 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chipset -> Host Bridge -> IGD – LCD Control Options summary: LVDS Enable/Disable Enable Disable Default LVDS Enable/Disable LCD Panel Type 1024x768 24Bit...
  • Page 92 S u b C o m p a c t B o a r d G E N E - B T 0 5 Default Adjust backlight brightness Chapter 3 AMI BIOS Setup 3-32...
  • Page 93 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chipset -> South Bridge Chapter 3 AMI BIOS Setup 3-33...
  • Page 94 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chipset -> South Bridge -> Azallia HD Audio Azalia HD Audio Disabled HD Audio Optimal Default, Failsafe Default Enabling/Disabling HD Audio controller.
  • Page 95 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chipset -> South Bridge -> USB Configuration Chapter 3 AMI BIOS Setup 3-35...
  • Page 96 S u b C o m p a c t B o a r d G E N E - B T 0 5 Chipset -> South Bridge -> PCI Express Configuration Options summary: PCI Express Root Port 0 Disabled Enabled Optimal Default, Failsafe Default...
  • Page 97 S u b C o m p a c t B o a r d G E N E - B T 0 5 Security Setup submenu: Security Change User/Supervisor Password You can install a Supervisor password, and if you install a supervisor password, you can then install a user password.
  • Page 98 S u b C o m p a c t B o a r d G E N E - B T 0 5 Removing the Password Highlight this item and type in the current password. At the next dialog box press Enter to disable password protection.
  • Page 99 S u b C o m p a c t B o a r d G E N E - B T 0 5 Exit Chapter 3 AMI BIOS Setup 3-39...

  • Page 100: Chapter 4 Driver Installation

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 101 S u b C o m p a c t B o a r d G E N E - B T 0 5 The GENE-BT05 comes with a DVD-ROM that contains all drivers and utilities that meet your needs.
  • Page 102 S u b C o m p a c t B o a r d G E N E - B T 0 5 4.1 Installation: Insert the GENE-BT05 DVD-ROM into the DVD-ROM Drive. And install the drivers from Step 1 to Step 10 in order. Step 1 – Install Chipset Driver 1.
  • Page 103 S u b C o m p a c t B o a r d G E N E - B T 0 5 Win7_8-32_64_R273.exe file 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 5 –...
  • Page 104 S u b C o m p a c t B o a r d G E N E - B T 0 5 The system will help you install the driver automatically Step 9 – Install USB3.0 Driver Click on the Step9 - USB3.0 folder and double click on the Setup.exe file Follow the instructions that the window shows The system will help you install the driver automatically...

  • Page 105: Appendix A Programming The Watchdog Timer

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer A-1...

  • Page 106: Watchdog Timer Registers

    S u b C o m p a c t B o a r d G E N E - B T 0 5 A.1 Watchdog Timer Registers Table 1 : Watch dog relative IO address I/O Base Default Value Note Address 0xA00...
  • Page 107 S u b C o m p a c t B o a r d G E N E - B T 0 5 Counting Unit 0x05 Select time unit. 0: second 1: minute Output Signal 0x05 0: Level Type 1: Pulse Must set this bit to 1 Watchdog...

  • Page 108: Watchdog Sample Program

    S u b C o m p a c t B o a r d G E N E - B T 0 5 A.2 Watchdog Sample Program *********************************************************************// WDT I/O operation relative definition (Please reference to Table 1) #define WDTAddr 0xA00 // WDT I/O base address Void WDTWriteByte(byte Register, byte Value);...
  • Page 109 S u b C o m p a c t B o a r d G E N E - B T 0 5 ********************************************************************* VOID Main(){ // Procedure : AaeonWDTConfig // (byte)Timer : Counter of WDT timer.(0x00~0xFF) // (boolean)Unit : Select time unit(0: second, 1: minute). AaeonWDTConfig(Counter, Unit);...
  • Page 110 S u b C o m p a c t B o a r d G E N E - B T 0 5 byte TmpValue; TmpValue = WDTReadByte(Register); TmpValue &= ~(1 << Bit); TmpValue |= Val << Bit; WDTWriteByte(Register, TmpValue); ********************************************************************* Appendix A Programming the Watchdog Timer A-6...

  • Page 111: Appendix B I/O Information

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 112: I/O Address Map

    S u b C o m p a c t B o a r d G E N E - B T 0 5 B.1 I/O Address Map B - 2 Appendix B I/O Information...

  • Page 113: Memory Address Map

    S u b C o m p a c t B o a r d G E N E - B T 0 5 B.2 Memory Address Map B - 3 Appendix B I/O Information...

  • Page 114: Irq Mapping Chart

    S u b C o m p a c t B o a r d G E N E - B T 0 5 B.3 IRQ Mapping Chart B - 4 Appendix B I/O Information...
  • Page 115 S u b C o m p a c t B o a r d G E N E - B T 0 5 B - 5 Appendix B I/O Information...

  • Page 116: Dma Channel Assignments

    S u b C o m p a c t B o a r d G E N E - B T 0 5 B.4 DMA Channel Assignments B - 6 Appendix B I/O Information...

  • Page 117: Appendix C Mating Connector

    S u b C o m p a c t B o a r d G E N E - B T 0 5 Appendix Mating Connector C - 1 Appendix C Mating Connector...

  • Page 118: List Of Mating Connectors And Cables

    S u b C o m p a c t B o a r d G E N E - B T 0 5 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Mating Connector Connector Available Cable P/N...
  • Page 119 S u b C o m p a c t B o a r d G E N E - B T 0 5 COM Port #3 Serial Port CN14 Molex 51021-0900 1701090150 Connector Cable COM Port #4 Serial Port CN15 Molex 51021-0900...
  • Page 120 S u b C o m p a c t B o a r d G E N E - B T 0 5 Appendix Electrical Specifications for I/O Port Appendix D Electrical Specifications for I/O Port D-1...
  • Page 121 S u b C o m p a c t B o a r d G E N E - B T 0 5 D.1 Electrical Specifications for I/O Port Reference signal name Rate output LVDS Port Inverter / Backlight +5V/1.5A or +5V/+12V Connector...

Table of Contents