Table of Contents
Advertisement
Basic Operations
Switching on/off
Switching to active mode
Press CD, TUNER, AUX or
USB PC LINK.
Switching to Eco Power standby mode
Press B.
ECO POWER button lights up.
The display screen will go blank.
Switching to standby mode (view
clock)
Press and hold B.
The clock is displayed.
While in standby mode, pressing
CLOCK•TIMER button will switch the system to
Eco Power standby mode.
Note:
– Before switching the system to Eco Power
standby or standby mode, make sure the
demonstration mode has been deactivated.
Demonstration mode
If the demonstration mode is active, whenever
you switch the system to Eco Power standby or
standby mode, it will begin showing the various
features offered by the system.
To activate the demonstration
In Eco Power standby/standby mode,
press and hold Ç on the main unit until
"DEMO ON" is displayed.
To deactivate the demonstration
Press and hold Ç on the main unit until
"DEMO OFF" is displayed.
14
Setting the clock
The clock can be set in either 12-hour or
24-hour mode ("11:59
example).
1
Press and hold CLOCK on the remote until
the time flashing on the display.
OR
Press and hold CLOCK•TIMER on the
main unit until "SELECT CLOCK OR
TIMER" is displayed. Then press ë to
change the display to "CLOCK" and press
CLOCK•TIMER again to confirm.
2
Press PROGRAM (PROG) repeatedly to
change between 12-hour and 24-hour clock
mode.
3
Press à or á repeatedly to set the hour.
4
Press í or ë repeatedly to set the minute.
5
Press CLOCK (or CLOCK•TIMER) to
store the setting.
The clock will start working.
Notes:
– The clock setting will be erased when the system
is disconnected from the power supply.
– The system will exit clock setting mode if no
button is pressed within 90 seconds.
– To set the clock automatically through the time
information in the RDS signal, refer to "Tuner
Operations - Setting the RDS clock".
" or "23:59" for
PM
00
00
(00:
/
12:
AM)
4
00
12
3
(
:00
/
:00AM)
(00:00 î 12:00AM)
2
1
5
,
Hide quick links:
Advertisement
Table of Contents
