Table of Contents
Advertisement
Wireless PC link playback
IMPORTANT !
For preparation, please refer to
the "Wireless PC Link Quick
Installation" and
www.philips.com/support.
PC LINK function
PC LINK enables you to playback your
music collection from the PC via the set.
Before playback can be started the
connection to an installed network/server
must be started. Make sure the wireless
USB adapter is connected or another
network connection is working properly.
CD
TUNER
CD 1
CD 4
1
Switch on your PC and wait until the PC
boot is ready.
Press PC LINK A to select the PC as
2
source.
PC LINK is displayed.
SERVER is displayed and the last active
server name is scrolled.
The last active server name is displayed
and CONNECTING is scrolled.
Note: If no PC server is installed PC LINK is
displayed and NOT INSTALLED is scrolled.
Install the PC server (see "Wireless PC Link
Quick Installation").
3
As soon as the connection is established:
PC LINK is displayed and a track name
is scrolled.
Note:The last played track will have been
stored and will be selected automatically.
16
AUX
PC LINK
CD 2
CD 3
CD 5
VOL
However, if you switch from one PC server to
another, the first track will be selected.
How to display the current server
name
To display the current server name press
0 0
PC LINK A while the display is neither
showing a server name nor a network
name.
SERVER is displayed and the current
server name is scrolled.
How to select another PC server
To switch between further installed
0 0
PC servers (see
www.philips.com/support) press
PC LINK A.
SERVER is displayed and the next server
name is scrolled.
To select the displayed server press 4 or
¢ as often as necessary while a server
name is shown.To confirm the selected
server press ALBUM ∞.
How to select another network
1
To switch between further installed
PC networks (see
www.philips.com/support) press
PC LINK A and then ALBUM 5 to enter
the network display.
To select the displayed network press 4
or ¢ as often as necessary while a
network name is shown.To confirm the
selected network press ALBUM ∞.
Note: If the network is not available the first
server name is displayed and
NO CONNECTION is scrolled.
2
After connecting the network a PC server
will be selected automatically.
The server name is displayed and
CONNECTING is scrolled.
Note: If no connection has been detected the
server name is displayed and NO
CONNECTION is scrolled.
Advertisement
Table of Contents
