Walksmart ExVia User Manual page 6

Reverse Button
Signal Indicator
Battery Indicator
Remote Control
Battery Indicator
Sync Button
Charging Port
ON/OFF
Hold the Power Switch
to turn on/off your remote.
This won't turn on/off the board.
Turn on/off the skateboard by
pressing the power button
on/off the board.
REMOTE BATTERY
When the light starts to flash
charge it. It's charging if the
light is red.
Remote Control Charging time:
2 hours
CHEKING PAIRING
If the light is not flashing, the
remote/board are not paired.
Check that the board is on.
If the light is still not on, press
the Binding Button.
controller glossary
Speed Control
Go forward
Brake
Speed Mode
Low
Medium
High
Power Switch
CHECK BOARD BATTERY
Press quick the Power Switch
to check the power left on
your board.
While charging check the light
on the charger:
- Red: not fully charged.
- Green: fully charged. Stop the
charging.
CHANGING RIDE MODE
Low Before switch modes, make
sure you have mastered the use
Medium
of the remote and board.
High
When changing modes:
- Keep a wide stance on the
board
- Lean forward when
accelerating
- Lean backwards when braking
.05