Related Manuals for Wearable Health Solutions iHelp+ 3G Series
Summary of Contents for Wearable Health Solutions iHelp+ 3G Series
- Page 1 Owner’s Manual iHelp+ 3G™ Accessory Kit Manufactured by Wearable Health Solutions, Inc.
-
Page 2: Table Of Contents
The iHelp+ 3G™ Accessories included in this manual are designed to work with the iHelp+ 3G™ mobile medical alert device and cannot be used with any 1. iH other medical alert system. You MUST have the iHelp+ 3G™ mobile medical alert device in order to use ANY of the accessories included. -
Page 3: What's Included In The Box
What’s included in the Box 1. iHelp+ 3G™ Docking Station 2. Wall Power Adapter 3. Remote Button 4. Wrist Strap/Bracelet 5. Breakaway Neck Lanyard... -
Page 4: Connecting Your Docking Station
Your Docking Station May Be Used To: 1. Charge your pendant; 2. Utilize your remote button; 3. Speak and listen to the operator directly through the docking station. Connecting Your Docking Station Plug the power adapter into the back of the docking station. Plug the other end into a regular wall outlet. -
Page 5: Using Your Remote Button
The pendant is charging when the light on the pendant flashes blue (every 5 seconds). It is fully charged when the light on the pendant stays solid blue. Using Your Remote Button In order to use your remote button, your iHelp+ 3G™ pendant must be placed into the docking station and left in there for as long as you are using your remote button. -
Page 6: In An Emergency
In An Emergency In the event of an emergency, press the large grey button on the front of your remote button for two (2) seconds and release. NOTE: YOU MUST BE WITHIN 100 FEET OF DOCKING STATION FOR YOUR REMOTE BUTTON TO WORK PROPERLY. The light on the remote button will flash blue once to... -
Page 7: Wearing Your Remote Button
Wearing your Remote Button You have the option of wearing the remote button around your neck, around your wrist, or simply carrying it in your pocket. Your remote button is not re-chargable, and has a battery that is designed to last up to two (2) years. Your remote button may be worn in the bath or shower. -
Page 8: On The Back Of Your Docking Station
On the Back of your Docking Station Your docking station has several ports on the back. These ports are used for various functions: 1. USB Power Adapter The docking station is designed for use with a 5V1A power adapter. When the power adapter is connected, the battery charging indicator illuminates solid which indicates that the back-up battery in the docking station is charging. - Page 9 3. Volume knob: Turn the dial clockwise to decrease the volume. Turn the dial counter clockwise to increase the volume of the speaker in the docking station.
-
Page 10: Terms And Conditions
Terms and Conditions Terms and Conditions can be found in the iHelp+ 3G™ owner’s manual or on the manufacturer’s website at ihelpalarm.com. Safety Precautions and General Warnings A minimum separation of six (6) inches should be maintained between a handheld wireless mobile device and an implant- able medical device to avoid potential interference with the device. - Page 11 Based on its operating frequency, the docking station and remote button should not interfere with pacemakers or common household appliances. No other power source may be used for this product other than the one specifically supplied by Wearable Health Solutions. Use of any other power source may void all war- ranties, and could also damage your unit and cause serious safety issues including personal injury, property damage, and cause the unit to malfunction resulting in the failure to obtain...
- Page 12 Regulatory Notifications IC ID: 8730A-RB Le présentappareilestconforme aux CNR d’Industrie Canada appli- cables aux appareils radio exempts de licence. L’exploitationestau- torisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage (2) l’utilisateur de l’appareildoit accepter tout brouillageradioélec- triquesubi, même si le brouillageest susceptible d’encomprom- ettre le fonctionnement.
- Page 13 the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.