Advertisement
Step B
Enjoy
Playing a USB mass storage device
1
Make sure that your MCM204 is being powered on.
2
SOURCE
Press
The LCD display shows - - - with USB DIRECT.
3
Plug a compatible USB mass storage device to MCM204's USB port marked
If needed, use a suitable USB cable to connect between the device and MCM204's USB port.
The device will automatically power on.
4
ÉÅ
Press
on your MCM204 to start playback.
5
9
Press
to stop playback.
INFORMATION REGARDING USB DIRECT:
1. Compatibility of the USB connection on this micro system:
a) This micro system supports most USB Mass storage devices (MSD) that these devices are compliant
to the USB MSD standards.
i) Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.
ii) If you see a "Disc Drive" showing up on your computer after you have plugged the mass storage
device into your computer, most likely it is MSD compliant and it will work with this micro system.
b) If your Mass storage device requires a battery/power source, please make sure you have a fresh
battery in it or charge the USB device first and then plug it into the micro system again.
2) Supported Music type:
a) This device only supports unprotected music with file extension: .mp3 .wma
b) Music bought from on-line music stores are not supported because they are secured by Digital Rights
Management protection (DRM).
c) File name extensions that ended with the following are not supported: .wav; .m4a; .m4p; .mp4; .aac and
etc.
3) No Direct connection can be made from a Computer USB port to the micro system even you have either
or both mp3 or wma file in your computer.
USB
repeatedly (or
on the remote) to enter USB mode.
2007 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
.
Tip:
Refer to the user manual supplied for
the description about compatibility of
USB mass storage device, and
playability of the files stored on the
USB device.
PDCC-JH-0704
Advertisement
