Related Manuals for Active Air AADHC602P
Summary of Contents for Active Air AADHC602P
- Page 1 U S E R M A N UA L D E H U M I D I F I E R ( 80 A N D 110 P I N T ) AADHC602P and AADHC1002P...
- Page 2 Hydrofarm.com...
-
Page 3: Table Of Contents
TABLE OF CONTENTS OVERVIEW FEATURES WARNINGS SPECIFICATIONS PRODUCT DRAWINGS DRAINAGE INSTALLATION DRAINAGE WITH THE BUILT-IN WATER TANK CONTINUOUS DRAINAGE WITH THE DRAINAGE PIPE MACHINE SETUP AND OPERATION KEY FUNCTIONS HUMIDITY AND TIMER SETUP OPERATIONS MAINTENANCE MACHINE STORAGE TROUBLE SHOOTING... -
Page 4: Overview
OVERVIEW Thank you for selecting the Active Air AADHC602P or AADHC1002P dehumidifier. This manual details the proper use and maintenance of your dehumidifier. Please take a few minutes to read this manual, and please keep it for further reference. Active Air industrial-grade dehumidifiers provide powerful and reliable dehumidification solutions for grow room environmental control. -
Page 5: Product Drawings
PRODUCT DRAWINGS Power cord Front panel hinges Hot air vents... -
Page 6: Drainage Installation
DRAINAGE INSTALLATION DRAINAGE WITH THE BUILT-IN WATER TANK The unit is designed to use the built-in water tank for drainage by default. When the tank is full, the screen will display “FULL” and also make a buzzing sound. 1. Press the POWER button to turn off the machine. 2. -
Page 7: Machine Setup And Operation
SETUP AND OPERATION KEY FUNCTIONS POWER – Turns the unit on and off. CONTINUOUS OPERATION – When pressed, the unit will operate continuously. TIMER/MODE – The unit has 5 modes: Humidity, Current Time, Timed Operation On, Timed Operation Off, and Exit. Every time you press the Timer/Mode button it cycles to the next mode. “+”... -
Page 8: Operations
machine operates by the default current time, the Timing On and Timing Off function, if set, will operate according to the default current time, but not the real current time. We strongly recommend that you set the current time. 3. To set for timed operation, press TIMER/MODE a third time and “Timing on” will display. Use the “+”... - Page 9 When the machine is in continuous operation, the desired humidity set point is still remembered but is deactivated. The machine will continuously dehumidify, no matter what the humidity set point is, until it is manually powered off or timed off. 1.
-
Page 10: Maintenance
MAINTENANCE 1. Clean the machine with a soft wet cloth. 2. Pull out the louver on the front panel to gain access to the filter. 3. Remove the filter mesh from the unit. 4. Use a clean rag to absorb the surface dust on the filter mesh. If the filter is extremely dirty, use tap water to flush the filter. -
Page 11: Machine Storage
MACHINE STORAGE If you will not be using the unit for an extended period of time, please store it per the following steps. • Clean the filter mesh. ATTENTION: The evaporator inside the machine has to be dried out before the unit is packed to avoid component damage and molds. - Page 12 Hydrofarm will, at our discretion, repair or replace the AADHC602P /AADHC1002P covered under this warranty if it is returned to the original place of purchase. To request warranty service, please return the AADHC602P/AADHC1002P, with original sales receipt and original packaging, to your place of purchase.
Need help?
Do you have a question about the AADHC602P and is the answer not in the manual?
Questions and answers