Connect Power; Prepare The Remote Control; Set Clock; Turn On - Philips MCM302/12 User Manual

Connect power

Caution
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the unit.
•
Risk of electric shock! When you unplug the AC power
cord, always pull the plug from the socket. Never pull
the cord.
•
Before you connect the AC power cord, ensure that
you have completed all other connections.
1
Connect the power cord to the AC~ jack
on the main unit.
2
Connect the power plug to the wall outlet.

Prepare the remote control

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fi re. Never discard batteries in fi re.
For fi rst-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control batteries:
1
Open the battery compartment.
2
Insert one lithium CR2025 battery with
correct polarity (+/-) as indicated.
3
Close the battery compartment.
Note
•
Before you press any function button on the remote
control, fi rst select the correct source with the remote
control instead of the main unit.
•
If you are not going to use the remote control for a
long time, remove the battery.

Set clock

1
In the standby mode, press and hold
CLOCK to activate the clock setting
mode.
»
The hour digits are displayed and begin
to blink.
»
If the hour digits are not displayed,
press and hold
seconds to switch to standby mode,
then repeat step 1.
2
Press + VOL - to set the hour.
»
The minute digits are displayed and
begin to blink.
3
Press + VOL - to set the minute.
4
Press CLOCK to confi rm the clock setting.

Turn on

1
Press .
»
The unit switches to the last selected
source.

Switch to standby mode

1
Press to switch the unit to Eco Power
Standby mode.
»
The backlight on the display panel
turns off.
»
The blue Eco Power indicator turns on.
for more than 2
EN 13