Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Raindrip WeatherSmart RSC600i
Summary of Contents for Raindrip WeatherSmart RSC600i
- Page 1 Installation & Programming Manual 877.502.7952 • raindrip.com/weathersmart...
-
Page 2: Table Of Contents
Warranty ....... .34 Notes ....... .35-36 raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 3: Irrigation System Overview
#6 x 1" Screws (2) Mounting Hardware ❸ D. Sprinkler Zones a. #8 X 1-1/4" Screws (4) ❼ E. Drip Irrigation Zones b. Drywall Anchors (4) ❹ Installation & ❶ Programming Guide ❺ Registration ❷ Card ❸ ❹ ❺ raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 4: Weathersmart™ Features
• Timer “undocks” to allow for • “Skip” function for manual is detected. comfortable / convenient interruption of watering schedule for programming. yard work and other activities. • Automatically adjusts for daylight savings. • Conventional timer mode (non-smart) option. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 5: Timer Overview
Reset – Stops watering; clears timer memory of any errors; and returns timer to the idle state. DATE, TIME, ZIP CODE, ❽ ❼ WATERING DAYS option, and WATERING SCHEDULE are not erased. ⓫ Removable Cover – To access SETTINGS, EDIT SCHEDULE, ⓫ and RESET buttons. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 6: Installation Requirements
• 2 AA alkaline batteries for weather station (WeatherSmartPRO ™ • Position the docking station over the anchors. • Insert and tighten one #8 X 1 ⁄ " screw in each of the four holes. Do not overtighten screws. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 7: Wiring
Repeat for each zone solenoid. • Check wires to ensure they are fully seated and secure. • Plug A/C Power Suppy connector to the "24 VAC POWER" terminal (red), then plug the Power Supply into a 110 volt outlet. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 8: Timer Settings
-Option 1: (see page 15) “WATER ON SPECIFIC DAYS OF WEEK” 3. Adjust CURRENT TIME -Option 2: (see page 16) (note AM or PM). “WATER ON ODD OR EVEN DATES OF MONTH” Press ENTER. SETTINGS are now complete. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 9: Rain Shutdown (Weathersmartpro ™ )
(watering durations increase for values greater than 100%; decreases if less than 100%) Rain shutdown adjustment is now complete. PERCENT ADJUST is now complete. OPTIONAL: press AUTO RUN button to exit edit schedule. OPTIONAL: press AUTO RUN button to exit edit schedule. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 10: Programming Watering Schedule
5. Repeat for all ZONES. (continued) (continued) CYCLES per day settings are now complete CYCLES per day settings are now complete OPTIONAL: press AUTO RUN button to exit edit schedule. OPTIONAL: press AUTO RUN button to exit edit schedule. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 11: Programming Notes
(SU, MO, TU, WE, TH, FR, SA). • Optional: To erase ALL entered watering schedule programs, press and hold EDIT SCHEDULE for 5 seconds. START TIME settings are now complete. OPTIONAL: press AUTO RUN button to exit edit schedule. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 12: Weather Station Overview (Weathersmartpro Installation: Weather Station (Weathersmartpro Auto Run (On / Skip / Off)
❻ (remove and discard bucket retainer strip). ❺ Mount Bracket – Multi-position ❺ mounting options. Mount Clip – Adjustable for various NOTE: Remove and discard ❻ bucket retainer strip. mounting positions, leveling, and attaches to bottom of base. raindrip.com/weathersmart raindrip.com/weathersmart... - Page 13 • Attach weather station to mount clip. Level as needed by adjusting mount clips. • Optional: Rainfall values can be reset to zero by pressing and holding and ENTER buttons together for 5 seconds. Weather station installation is now complete. raindrip.com/weathersmart raindrip.com/weathersmart...
-
Page 14: Water Now
SKIP programming is now complete. button will not stop a manual watering cycle. OFF: Timer is “off” and will not execute any watering schedule program. • WATER NOW manual watering cycles are not included in TODAY or YTD water savings calculations. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 15: Disabling Smart Mode
• Rainbird ® RSD-CEx • TODAY WATER SAVINGS will display 00%. • Hunter ® Mini-Clik ® • Hunter ® Rain-Clik ™ • Watering durations will not be reduced seasonally. • Toro ® • Water savings may not be realized. raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 16: Operational Notes
• ERROR Check Sensor - single beep every 15 seconds. - WeatherSmart PRO signal from the weather station. - WeatherSmartPRO See troubleshooting on page 30. • Upper or Lower Start Time Value Reached (when programming) - single beep raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 17: Faq
TEMPERATURE indicator is on Normal if temperature is less than 40°F system performance. (WeatherSmartPRO) 11. Do the valves operate when the timer is undocked? No. The timer cannot operate valves when it is undocked. Watering will not occur. watch the video at raindrip.com/smart... -
Page 18: Programming Aid
S T A R T T I M E S S T A R T T I M E S (5 minute increments) (5 minute increments) 6:30 AM 8:20 PM 6:30 AM 8:20 PM 9:30 PM 8:40 PM 9:30 PM 8:40 PM 9:00 PM 9:00 PM raindrip.com/weathersmart raindrip.com/weathersmart... -
Page 19: Specification
Warranty Limitations. The duration of any implied warranty or condition, of merchantability, fitness for a particular purpose, or otherwise, on this product shall be limited to the duration of the express warranty set forth above. In no event shall Raindrip be Depending on usage environment, batteries should be replaced once a year. -
Page 20: Notes
Notes Notes raindrip.com/weathersmart raindrip.com/weathersmart... - Page 21 877.502.7952 Monday - Saturday 8:00 AM - 4:00 PM (PST) Sunday 8:00 AM - 1:00 PM (PST) techservice@ndspro.com raindrip.com/weathersmart RSC INSTG-B...
Need help?
Do you have a question about the WeatherSmart RSC600i and is the answer not in the manual?
Questions and answers