1. Manuals
  2. Brands
  3. Studiomaster Manuals
  4. DJ Equipment
  5. DJX Series
  6. User manual

Studiomaster DJX Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Introduction
The information presented in this manual is intended for competent technical personnel to carry out service and
product support for the DJX series of DJ consoles. We assume that the reader is familiar with the related
electronic theory and audio terminology. And is able carry out servicing. Fault finding and repair of audio
equipment of this type. Service person should also be familiar with audio system. mains earthing and power
requirements. As well as handling precautions.
For information on the configuration, operation and application of DJX series range please refer to DJX series
USER GUIDE.
Service and Technical Support
Under normal condition the DJX series does not require maintenance or internal calibration. Any service work
required should be carried by qualified service person only.
We offer further product support throughout our network of approved dealer and service agents. To help provide
the most efficient service please keep a record of the console serial no. the date and place of purchase to be
.
quoted in any communication regarding this products

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DJX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Studiomaster DJX Series

Summary of Contents for Studiomaster DJX Series

  • Page 1 The information presented in this manual is intended for competent technical personnel to carry out service and product support for the DJX series of DJ consoles. We assume that the reader is familiar with the related electronic theory and audio terminology. And is able carry out servicing. Fault finding and repair of audio equipment of this type.
  • Page 2 Important Safety Instruction- Read First Read Instruction: Retain this safety and operating instructions for future reference. Adhere to all warning printed here and on the console Power sources: Connect the console to a mains power only of the type described in the Service manual and marked on the rear panel.

  • Page 3: Specifications

    SPECIFICATIONS INPUT SENSITIVITY: -57.0 dBu PHONO -43.0 dBu LINE 0.0 dBu OUTPUT SENSITIVITY: OUTPUT 0.0dB/10K Ÿ RECORDING 12.0dB/47K Ÿ EQUALIZER: TREBLE LINE ± 12dB/10 KHz MIC ± 10 dB/10 KHz LINE ± 12 dB/1.5 KHz MIC ± 10 dB/1.0 KHz BASS LINE ±...

  • Page 4: Master Setting

    Gain and Operating Levels From the User Guide: SOUND LEVEL SETTING: Set the VU meter to cue and the select the channel to be set via the CUE SELECT switch. Set the GAIN in such a way that the level on the VU-meter display about 0dB. Set the tone control as required. If necessary adjust the GAIN again so that the VU-meter display once again about the 0dB.

  • Page 5: Service Tools

    SERVICE TOOLS The tools required to service the DJX series DJ mixer are standard to an electronic service workshop and are easily obtainable. The following items are necessary for disassembly and service access: 1. Philips #1 and #2 screwdrivers and good quality hand tools 2.
  • Page 6 BLOCK DIAGRAM - DJX 300 MK I Connector type RCA PHONO pin connector TRS input connector: Tip= Hot (+), Ring = Cold (-), Sleeve = GND Input Connection Type Impedance Sensitivity MIC IN ¼” JACK 2K OHMS -54dBu Stereo LINE IN PHONO JACK 10K OHMS 775mV RMS (0dBu)

  • Page 7: Installation

    INSTALLATION EARTHING The connection to earth (Ground) in an audio system is important for two reasons: SAFETY – To protect the operator form high voltage electric shock. AUDIO PERFORMANCE – To minimize the effect of earth (Ground) loops which result in audible hum and buzz, and to shield the audio signals from interference.

  • Page 8: Spare Parts Order

    SPARE PARTS ORDER ORDER NO DESCRIPTION SMSWTSGS005 Cue Switch Selector DJX-300 SMRESVRS049 Cue level/Master Rotary Control for DJX-300 MK I SMRESVSS016 Treble/Mid/Bass/Split Ctrl for Mic Ch. DJX-300 MK I SMTFRTFS027 Transformer of DJX-300 MK I SMMISSXS050 Top Panel for DJX-300 MK I SM SWTPS002 On/ off switch for DJX-300 MK I SMCONSCS008...
  • Page 9 BLOCK DIAGRAM OF IC USAGE (THIS IC USED FOR INPUT AND OUTPUT STAGE OF MIXER LIKE MIC, LINE, PHONO INPUT, MASTER AND BOOTH OUTPUT). BA 4560 IC BARGRAPH IC LM339...

  • Page 10: Voltage Chart

    VOLTAGE CHART Mains Transformer Main Input Fuse- 50 mA Primary = 230 volt Ac Secondary1= 13.10 Volt AC – 0 – 13.10 Volt AC DC output Unregulated= 13.46 – 0 – -13.46 Volt LINE/PHONO INPUT BOARD IC no.1,2,3,4 are BA 4560. IC pin no.
  • Page 11 DISPLAY BARGRAPH OF MAIN BORAD IC LM339 IC pin no. IC no.17 IC no.18 IC no.19 Pin no. 1 -13.54 -13.4 -13.54 Pin no. 2 -13.18 -13.44 -13.55 Pin no. 3 13.46 13.46 13.49 Pin no. 4 0.81 0.27 Pin no. 5 Pin no.

This manual is also suitable for:

Djx 300 mk iDjx 300

Table of Contents