Advertisement
2
Setup
A
B
Set the alarm timer
Set clock
1 In standby mode, press and hold TIME
1 Ensure that you have set the clock
SET/AUTO SCAN for 2 seconds.
correctly.
» The hour digits begin to blink.
2 Press and hold ALARM 1 or ALARM 2
for 2 seconds.
2 Press TUNING +/- to set the hour.
or
»
3 Press TIME SET/AUTO SCAN .
blink.
» The minute digits begin to blink.
3 Press TUNING +/- repeatedly to set the
4 Press TUNING +/- to set the minute.
hour.
5 Press TIME SET/AUTO SCAN to
4 Press ALARM 1 or ALARM 2 to
confi rm.
confi rm.
» The week day digits begin to blink.
or
»
6 Press TUNING +/- to set the week day.
to blink.
7 Press TIME SET/AUTO SCAN to
5 Repeat steps 3-4 to set the minute.
confi rm.
6 Repeat steps 3-4 to select whether to ring
alarm on weekdays or at weekend.
» "L XX(volume level)" begins to blink.
7 Repeat steps 3-4 to set the maximum alarm
volume.
DC190_79_QSG_EN.indd
DC190_79_QSG_EN.indd
5-7
5-7
2
Setup
Set alarm mode
1 Adjust the WAKE TO iPod/RADIO/
BUZZ control to select the source for
the alarm.
» When the alarm time comes, the
selected iPod, radio or buzzer turns on.
and hour digits begin to
Activate and deactivate the alarm timer
1 Press ALARM 1 or ALARM 2 repeatedly
to activate the timer.
» If the timer is activated,
is displayed.
and minute digits begin
•
To deactivate the alarm timer, press
ALARM 1 or ALARM 2 repeatedly
until
is displayed.
» If the timer is deactivated,
disappears.
Repeat alarm
1 When the alarm rings, press REPEAT
ALARM/BRIGHTNESS CONTROL .
» The alarm repeats ringing minutes later.
E Tip
•
You can press
TUNING+/- to adjust
interval to repeat alarm.
Stop alarm ring
or
1 When the alarm rings, press the
corresponding ALARM 1 or ALARM 2 .
» The alarm stops but the alarm settings
remain.
or
2 3
Enjoy
A
B
Play from iPod
Program and listen to radio
stations
1 Push to open the dock compartment.
1 In the tuner mode, press and hold TIME
SET/AUTO SCAN for more than 2
seconds to activate automatic program
mode.
» All available stations are programmed
in the order of waveband reception
strength.
2 Place the iPod in the dock.
» The fi rst programmed radio station is
broadcast automatically.
2 Press PRESET +/- to select a preset
number.
E Tip
3 Press SOURCE repeatedly to select iPod
•
Detailed functions and features are
source.
described in the user manual.
» The connected iPod plays automatically.
•
To pause/resume play, press
.
•
To skip to a track, press
/
.
•
To search during play, press and hold
/
, then release to resume normal play.
6/1/2009
6/1/2009
11:03:19 AM
11:03:19 AM
Advertisement
