Page 1
Aluminum Cargo Carrier with 60” Long Ramp Instruction Manual & Model 70275 Parts Catalog Read and understand this entire manual before assembling, installing, operating, or servicing this product. SAVE THIS MANUAL Copyright 2012 by PGS, LLC .. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of PGS, LLC.
Carrier. Never work while un- or damaged goods. Notify PGS, LLC immediately if any hidden cations. loss or damage is discovered after receipt. Model 70275 Page 2...
Page 3
G. For the vehicle that will support the Car- rier, read all pertinent vehicle instructions and warnings provided in the owner’s manu- al. Make sure the vehicle’s engine is OFF, with parking brake set, before loading or Model 70275 Page 3...
Page 4
U-Pin (6) and Split Pin sides of Carrier Basket, using Washers (15) (5) on each side - see photos, top of next and Nuts (16) - see photo below. page. Slide one Washer on each Hook, and insert Model 70275 Page 4...
Page 5
#6 on pages 4 and 5), or the two openings on hitch receiver and Hitch Tube, and put the Hitch Pin (9) in place. Secure rier Basket - see photo on page 6. Hitch Pin with the Safety Pin (10). Model 70275 Page 5...
Frequently check the Anti-Tilt Locking Bracket (31) to make sure that the two bolts on the underside are tightened down to tie together the hitch re- ceiver and the Hitch Bar (2). Model 70275 Page 6...
PGS LLC, 1270 Avenida Acaso STE E, Camarillo, CA 93012 Tel: 805-987-1333 Fax: 805-603-1355 PGS LLC ensures complete satisfaction with this product. In the event of miss- ing or damaged parts please call toll free, Customer service hours 9:00-5:00, Monday-Friday, PST., Model 70275 Page 7 1-805-987-1333...
Need help?
Do you have a question about the 70275 and is the answer not in the manual?
Questions and answers