WTC TIME CLOCK CONTROL VALVE |
1
TIME OF DAY SETTING
Press and hold the SET button for 3 seconds.
The arrow will point to Time.
Press the UP or DOWN arrows to adjust the
hour. The arrow will point to PM for PM
hours only.
Press the SET button.
Press the UP or DOWN arrows to adjust
the minutes.
Press the SET button.
3
REGENERATION FREQUENCY SETTING
Press the UP or DOWN arrows to adjust the
days of regeneration frequency. The factory
setting is every 7 days.
Press the SET button. Screen will now show
the time.
© WATER TENDER 2016 | WATER-TENDER.COM | WTCFILTER-SETUP
QUICK SET UP
2
4
6201 South Hanover Rd, Elkridge, MD 21075 | P: 410-796-7700 | F: 410-796-7739 | T: 800-796-7700
Quality Water Treatment Products
TIME OF REGENERATION SETTING
Press and hold the SET and UP buttons for
3 seconds. The arrow will point to Time.
Press the UP or DOWN arrows to adjust
the hour. The factory setting is 1 AM.
Press the SET button.
Press the UP or DOWN arrows to adjust
the minutes.
Press the SET button. The arrow will jump to
Days to Regen.
SYSTEM SET UP IS COMPLETE!
When system is operating one of two displays will
be shown: Time or Days to Regen. Pressing the UP
or DOWN buttons will toggle between the two
choices.
See the back of this document for more set up
options and error codes.
®