Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for LinkLabs LL-RPT
- Page 1 LL-RPT R EPEATERS...
-
Page 2: Table Of Contents
Table of Contents Table of Contents User's Guide ..............................3 What is the LL-RPT Repeater and what comes in the box?............4 Minimum system requirements....................... 5 How do I configure a repeater for a Symphony Link network?............ 6 What do the LEDs mean? ........................7 How do I test the repeater using a network tester? .............. -
Page 3: User's Guide
User's Guide User's Guide LL-RPT Repeaters Page 3 Page 3... -
Page 4: What Is The Ll-Rpt Repeater And What Comes In The Box
What is the LL-RPT Symphony Link Repeater? The LL-RPT Symphony Link Repeater is a simple plug in device that can be used to extend the bidirectional communication range of your Symphony Link system. If placed appropriately into a Symphony Link system, the LL- RPT Symphony Link Repeater will act as a store and forward relay. -
Page 5: Minimum System Requirements
• LL-BST-8 gateway software version 1.5.2 or later LL-BST-8 gateway software version 1.5.2 or later • LL-RLP-20 and LL-RXR-27 LL-RLP-20 and LL-RXR-27 module firmware module firmware version 1.5.0 or later version 1.5.0 or later LL-RPT Repeaters Page 5 Page 5... -
Page 6: How Do I Configure A Repeater For A Symphony Link Network
Step 6: Detach the repeater from the gateway by removing the USB patch cord. Step 7: Again, supply power to the LL-BST-8 gateway. Step 8: Supply power to the LL-RPT repeater by plugging it into a typical wall receptacle using the USB-to-wall-plug adapter. -
Page 7: What Do The Leds Mean
What do the LEDs mean? What do the LEDs mean? LL-RPT Repeaters Page 7 Page 7... -
Page 8: How Do I Test The Repeater Using A Network Tester
Required equipment 1 LL-BST-8 Symphony Link gateway (with minimum software version 1.5.2) 1 LL-RPT Symphony Link repeater 1 LL-NT Symphony Link Network Tester • The LL-RXR-27 module on the network tester must have Symphony LInk firmware version 1.5.0 or later. - Page 9 When connected to the Repeater, the D1 LED on the Network Tester should go solid red, the "Network Diagnostics" should display the last 8 digits of your Symphony Link Gateway's ID, as well as an RSSI read-out that shows the current signal strength received from the Repeaters beacon. LL-RPT Repeaters Page 9 Page 9...
-
Page 10: Example Network Topology Diagram
Example Network Topology Diagram Example Network Topology Diagram LL-RPT Repeaters Page 10 Page 10... -
Page 11: Mounting Diagram
Mounting Diagram Mounting Diagram LL-RPT Repeaters Page 11 Page 11... -
Page 12: Theory Of Operation
Symphony Link Repeaters per Symphony Link Gateway. For special cases, please contact support@link-labs.com to determine whether a larger number of repeaters is acceptable. LL-RPT Repeaters Page 12 Page 12...
Need help?
Do you have a question about the LL-RPT and is the answer not in the manual?
Questions and answers