1. Manuals
  2. Brands
  3. Refinair Manuals
  4. Trowels
  5. CPT 60 Powerfloat
  6. User & safety instructions

Refinair CPT 60 Powerfloat User & Safety Instructions

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
CPT 60 Powerfloat
User & Safety
Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPT 60 Powerfloat and is the answer not in the manual?

Questions and answers

Summary of Contents for Refinair CPT 60 Powerfloat

  • Page 1 CPT 60 Powerfloat User & Safety Instructions...

  • Page 2: General Instructions

    This handbook contains operating and maintenance instructions for the Refina CPT60 Power float Please keep it in a safe place. You may need to refer to it at a later date Follow these instructions carefully in order to become familiar with the trowel and its use PPE protection should be worn whilst operating this machine to include safety shoes, ear defenders, gloves and eye protection INTRODUCTION...
  • Page 3 Before each working day, check the trowel thoroughly. Pay special attention for loose nuts and bolts and check all power cables for damage such as cuts and peeled wires. Be sure that the deadman switches on the trowel are working correctly When finishing concrete above ground level or on floors with holes larger than 20x20cm, barriers should be installed as a protective measure.

  • Page 4: Using The Trowel

    STARTING THE TROWEL  The trowel is delivered pre-assembled with the trowel arm folded  On delivery, place the trowel on a flat, level surface to check it  Contact Refina immediately if there is any damage  Unfold the handle and fasten the locking knob ...

  • Page 5: Machine Cleaning

    MACHINE CLEANING Clean the trowel after it has been used to prevent the collection of hardened cement, which is very difficult to remove. Cement paste that has started to harden can be removed with an old paint brush or hand brush After cleaning, it is recommended to coat the blades, blade arms and protection ring with stripping oil (do not use flammable oil) this will aid cleaning after the machine is used.

  • Page 6: Troubleshooting And Repair

    TROUBLESHOOTING & REPAIR Before any maintenance or repair make sure the power to the engine is turned off and the connection cables are unplugged. It is recommended to only carry out the operations described in previous sections. Contact Refina for all other repairs TROUBLESHOOTING CAUSE REMEDY...

  • Page 7: Warranty

    WARRANTY New machines sold by the Company are covered by warranty with regard to the structure and the use of proper materials under the following terms:  The warranty is valid for twelve (12) months  The manufacturer undertakes to repair or replace at its discretion those parts or assemblies which it deems to be defective ...
  • Page 8 REFINA Unit 7 Factory Road, Upton Industrial Estate Poole, Dorset, BH16 5SL UK T: 01202 632270 F: 01202 632432 sales@refina.co.uk www.refina.co.uk...

Table of Contents