Advertisement
Table of Contents
- 1 Installation Kit Includes the Following Items
- 2 Gently Remove the Plastic Trim
- 3 Remove the Original Radio
- 4 Remove Two Screws
- 5 Remove the Air Ventilation Shafts
- 6 Connect All of the Needed Wiring Harnesses
- 7 Place the 2-Din Metal Bracket
- 8 Place the Headunit and Replace All the Panels
- Download this manual
Hyundai Santa FE 2005 -->
EXAMPLE
Use this hole
Use this hole
Remark: The fi xing position can be different between Audio and Multimedia unit!
2-DIN
Installation manual for:
* Mount the plates.
BKX-1142-01
Installation kit includes the following items:
* 1X 2-ISO 100 mm. metal bracket
* 1X Radio trim
* 2X Mounting plates
* 2X Mounting spacers
* 2X Radio removal keys
* 4X Screws
We advice to use the following positions.
Other positions are also possible.
Use position 2 marked with a cross.
Use position 14 & 16 marked with an arrow.
Measured from left to right.
We advice to use the following positions.
Other positions are also possible.
Use position 2 marked with a cross.
Use position 14 & 16 marked with an arrow
Measured from left to right.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Clarion BKX-1142-01
- Page 1 2-DIN BKX-1142-01 Installation manual for: Hyundai Santa FE 2005 --> Installation kit includes the following items: * 1X 2-ISO 100 mm. metal bracket * 1X Radio trim * 2X Mounting plates * 2X Mounting spacers * 2X Radio removal keys...
- Page 2 2-DIN BKX-1142-01 Gently remove the plastic trim at the Remove two screws at the location of the locations of the arrows. arrows. These are in the storage pocket. Remove the air ventilation shafts. This is tighten by screws at the location of the arrows.
Need help?
Do you have a question about the BKX-1142-01 and is the answer not in the manual?
Questions and answers