Advertisement
Table of Contents
P R O F E S S I O N A L
1
⁄
"
2
4
1
⁄
"
8
Robusta without optional Weatherguard Hood:
⁄
"
3
4
1-800-858-5818 • www.futureguard.net
•
T E C H N I C A L
1"
3
⁄
"
8
3
⁄
"
3
16
⁄
3
"
8
Robusta with optional Weatherguard Hood:
•
I N S T A L L A T I O N
The Robusta
R E T R A C TA B L E W I N D O W A W N I N G
Robusta fully retracted
•
G U I D E
Robusta in down position
G U I D E
R
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Futureguard Robusta
Summary of Contents for Futureguard Robusta
- Page 1 R E T R A C TA B L E W I N D O W A W N I N G Robusta fully retracted Robusta in down position 1” ⁄ ” ⁄ ” ⁄ ” ⁄ ” G U I D E ⁄ ” Robusta without optional Weatherguard Hood: Robusta with optional Weatherguard Hood: ⁄ ” 1-800-858-5818 • www.futureguard.net...
-
Page 2: Installation Instructions
1: PREPARING THE INSTALL Determine your awning mounting location on the wall or soffit. Lay the Robusta roller tube and bracket assembly on a clean flat surface with the wall brackets in place. Measure the full width of the assembly including the end brackets. The bolts’ holes for securing the bracket to the wall are 1½"... - Page 3 If your awning is equipped with a 3-wire RTS remote control motor, please identify which motor you have and follow the programming and limit switch settings on the next page. If your motor has a 4-wire pigtail, please contact Futureguard for wiring and limit setting instructions.
- Page 4 (-) direction. Confirm that the motor is stopped at the limit and set the limit as per step 2. If the motor is not stopped at the limit, continue turning the limit adjustment screw (up to 120 turns may be required). STEP 5: Set both limits at the desired UP and Down positions. Robusta Technical 03/17 1-800-858-5818 • www.futureguard.net...
Need help?
Do you have a question about the Robusta and is the answer not in the manual?
Questions and answers