Composite audio and video monitor
with 2/4 channel switching, lcd
monitor, four 53-segments high-resolution
level meters, and phase indication (21 pages)
Page 2
Introduction Congratulations on your selection of a PANORAMAdtv product. We are confident it represents the best performance and value available, and we guarantee your satisfaction with it. If you have questions or comments you may contact us at: Wohler Technologies, Inc.
MON3-3 Front Panel Description The MON3-3 is a 3RU chassis containing three 5.6 inch (142.2mm) Active Matrix TFT LCD’s. Each LCD is back lit with a cold cathode fluorescent tube. The LCD can display standard NTSC or PAL analog video signals. A second analog video input can be selected with the optional Analog B Board.
Page 5
Section 1: General Features and Specifications Applications The MON3-3 is ideally suited for monitoring of multiple video feeds in VTR bays, mobile production vehicles, news and transmission control rooms, and duplication and post production applications. Designed and manufactured in the U.S., the MON3-3 is backed by a strong warranty and a satisfaction guaranteed return policy.
Page 9
In the vertical axis, good image quality is obtained between 10 degrees looking down and 30 degrees looking up. The MON3-3 displays are mounted in a rotating cylinder that allows you to adjust the display angle +/- 30 degrees to provide optimum operator viewing angles. Due to the nature of LCD’s, there are certain anomalies, which can cause the displayed video to appear incorrect.
Page 10
Section 2: Operation Front Panel Features Please refer to Figure-2a on the following page to familiarize yourself with the front panel features of the MON3-3 unit. The following sections describe these features and are referenced, by number, to Figure-2a. Power Indication LED The Power Indicator glows green when mains power is connected to the MON3-3 unit.
Page 12
When operating, refer only to the silk-screen text (above each installed feature) that is lined up with the marked checkbox. Note that in the modular chassis used for the MON3-3 model, the forth input sections (4A and 4B) are never used and the connector holes are covered with plugs.
Page 16
MON3-3 User Manual P/N 821514 Rev-E Section 3: Technical Information Tally Control Connections A front panel dual-color Tally Indication LED is associated with each LCD display module. Interface is provided to the LEDs via the Tally Control Connector located on the chassis rear panel. The Tally Indicator LEDs are capable of displaying three colors;...
Field Upgrading This section explains the procedures for field upgrading your unit with additional SDI video input module(s). We advise you remove the MON3-3 from the mounting frame and work with the unit on a clean, well lighted work bench.
This section explains the procedures for field upgrading your unit with additional composite video (CVBS) input module(s). We advise you remove the MON3-3 from the mounting frame and work with the unit on a clean, well lighted work bench. Ensure the MON3-3 is disconnected from the power mains.
Page 20
MON3-3 User Manual P/N 821514 Rev-E PANORAMAdtv Wohler Technologies, Inc. 31055 Huntwood Avenue 31055 Huntwood Avenue Hayward, CA 94544 Hayward, CA 94544 1-888-596-4537 Phone: (510) 870-0810 Fax: (510) 870-0811 Fax: (510) 870-0811 US Toll-Free: 1-888-596-4537 web: www.panoramadtv.com www.panoramadtv.com sales@panoramadtv.com e-mail: sales@panoramadtv.com...