Advertisement
Connect
A
Connect AC power
Connect the DC cable with the docking cradle and Pipe speaker first, then connect it
with the AC adapter, and then connect the adapter with the AC power cord.Then plug
the AC plug into a standard AC outlet.
Docking cradle
Pipe speakers
1
3
AC outlet
5
4
DC cable
2
AC power cord
6
Pipe speakers
AC adapter
power on/off
CAUTION:
This product is powered by a specified power supply unit SA1460-240200
(I/P: AC 100-240 V~, 50/60 Hz, 1.5 A; O/P: DC 24V
, 2.0 A).
Connect audio cable
Plug one end of the audio cable to the black 3.5mm Audio Out jack, and the
other end to the audio in jack on the pipe speaker.
(Audio Out)
Install
B
1
1
Change the docking cradle to match with your
portable player
The docking cradle can support both iPod and GoGear. Follow steps below to
change it into desired mode
- Default position is prepared for iPod
- Go to B
Install for iPod user.
2
1. Slide the front cover horizontally in the direction shown above to open the
front cover
2. Rotate the front cover in 180 degree
3. Slide the front cover back onto the docking cradle
Install
B
2
2
Install dock adaptor
Insert a dock adapter that matches with your portable player (take iPod adapter as
example).
2
1
3
Install portable player
Plug your portable player into the cradle (take iPod as example).
-Turn on the power of pipe speakers.
Un-install
To connect with a different iPod portable players, dismount the iPod first, then
pop up the corresponding dock adapter and replace with a new one of the
matching type.
Enjoy
C
You can use the controls on your iPod/GoGear to playing
music. However, with the supplied remote control,you can
enjoy music in a more easy and comfortable way.
Power on/off
Press Power to turn the iPod on or off
MENU
OK
Note: This function isn't applicable for GoGear
Play
OK
Press 2; to start playing
• While playing, press 2; to stop playing temporarily. Press 2;
again to resume playing.
Adjust volume
VOLUME
Press Volume -/+ to increase or reduce volume
Skip to the previous or next track
• Press
to skip to the previous track
VOLUME
• Press
to skip to the next track
Searching for desired track
MENU
1. Press MENU button
• The MENU screen is shown on the iPod
2. Press 3 or 4 to select desired folder, then press Select (OK)
MENU
button to confirm the selection
OK
Note: This function isn't applicable for GoGear
Charging iPod using the docking station
When the iPod is properly connected on the docking
cradle and the power supply to the docking cradle is connected,
battery charging start automatically.
Helpful hint:
• You can also use a USB cable (not supplied) to connect the
docking cradle with your PC to charge your iPod or GoGear
VOLUME
OK
Advertisement
