Advertisement
Model Composition
VL-SW251
Specifications
Model number and name
Main Monitor Station (Main monitor)
Dimensions
Power supply
Power consumption
During operation: Approx. 0.28 A
Dimensions (H x W x D)
(Excluding protruding sections)
Weight
0 °C to 40 °C, Up to 90 % RH
Operating environment
(Relative Humidity) non condensing
Display
Approx. 5-inch, wide colour display
Frequency
Viewing angle
Installation method
(Wall mount bracket included)
Minimum illuminance required
Lighting method
IP rating/IK rating
External material
*1 Water resistance is only assured if the camera is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Model number and name
Optional Repeater for Wireless Monitor
Up to 2
Dimensions
101
* Cannot be connected to the VL-SW251AZ.
AC adaptor (100 – 240 V AC, 50/60 Hz)
Power supply
Power consumption
During operation: Approx. 0.08 A
Dimensions (H x W x D)
(Excluding protruding sections)
Weight
0 °C to 40 °C, Up to 90 % RH
Operating environment
(Relative Humidity) non condensing
Frequency
Viewing angle
Installation method
External material
Installing the Doorphone
•
Example: Installation height is 1450 mm (standard position).
Side view
1810 mm
Centre of
the door
station
66°
650 mm
Image
range
1450 mm
1160 mm
500 mm
Top view
Image range:
960 mm
87°
500 mm
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
*Due to product enhancement, Sin Chew Alarm reserved the right to change/modify specifications without prior notice.
VL-SW251BX (VL-MW251BX x 1, VL-W605BX x 1, VL-V522L) / VL-SW251CX (VL-MW251CX x 1, VL-W605CX x 1, VL-V522L)
VL-SW251SX (VL-MW251BX x 1, VL-W605BX x 1, VL-V522L) / VL-SW251AZ (VL-MW251AZ x 1, VL-W605AZ x 1, VL-V522L)
VL-MW251BX/CX/AZ
Door Station (Doorphone)
Up to 2
165
38
190
100 – 240 V AC, 50/60 Hz
Supplied by the Main Monitor Station
Standby: Approx. 0.04 A
Approx. 190 x 165 x 38 mm
Approx. 131 x 99 x 36.5 mm
Approx. 785 g
-10 °C to 50 °C, Up to 90 % RH
(Relative Humidity) non condensing
2.402 GHz – 2.481 GHz
-
Wall mount
(Wall mount base included)
-
1 lx (within approx. 50cm from the camera lens)
-
Warm white LED lights, Infrared LEDs
-
Flame retardant ABS resin
Flame retardant ABS resin
VL-FAN1BX/CX
69.5
82
* Cannot be connected to the VL-SW251AZ.
100 V – 240 V AC, 50/60 Hz
VL-FAN1BX: 2 pin AC plug
VL-V590BX: 2 pin AC plug
VL-FAN1CX: 3 pin AC plug
VL-V590CX: 3 pin AC plug
Standby: Approx. 0.05 A
During operation: Approx. 0.03 A
Approx. 27 x 101 x 82 mm
Approx. 358 x 180 x 17.3 mm
Approx. 69.5 x 101 x 82 mm
(Excluding sections embedded into the wall)
(when raising the antenna)
Approx. 85 g
-10 °C to 50 °C, Up to 90 % RH
(Relative Humidity) non condensing
2.402 GHz – 2.481 GHz
-
-
(Flush mounted box included)
Flame retardant PS resin
Stainless steel and flame retardant ABS resin
Wood screws
Mounting base
Wire (Not included)
99 mm
Mounting base
VL-V522L
99
Up to 4
36.5
131
Ni-MH battery (3.6 V DC / 650 mAh)
-
Approx. 157 x 52 x 35 mm
Approx. 200 g
Approx. 175 g (including the battery)
0 °C to 40 °C, Up to 90 % RH
(Relative Humidity) non condensing
-
1.8˝ colour LCD monitor
-
2.402 GHz – 2.481 GHz
Horizontally: Aprrox. 87˚
Vertically: Approx. 66˚
Wall mount
IPX3*
1
Wiring schematic diagram
VL-V590BX/CX
Optional Lobby Station
Door station 1 *
180
17.3
You can also connect
358
an optional lobby
station for apartment
complexes. *
Main monitor station
Standby: Approx. 0.02 A
Power plug
(100 – 240 V AC)
*1 For VL-MW251BX/VL-MW251CX/VL-MW251SX users:
Approx. 2.0 kg
The door station is optional (not included).
*2 Connecting an optional lobby station for apartment complexes
Wire type and length
-
•
Wire (between the main monitor station and the door station):
Horizontally: Aprrox. 87˚
Vertically: Approx. 66˚
Type
General cable CAT-3
Wall mount
General cable 22 AWG (ø 0.65)
•
Wire (between the main monitor station and PBX):
Type: General cable CAT-3 or 22 AWG (ø 0.65)
Distance: Maximum 100 m
Installing the Main Monitor
83.5 mm
Wall
24 mm
83.5 mm
131 mm
MG-DHPL004EN 1410ITP/ZZZ-1
VL-W605BX/CX/AZ
Wireless Monitor (Sub monitor station)
Main body
52
35
157
VL-W605BX: PQLV219BX (100-240 V AC, 50/60 Hz)
VL-W605CX: PQLV219E (220-240 V AC, 50/60Hz)
VL-W605AZ: PQLV219AZ (220-240 V AC, 50/60 Hz)
-
Approx. 115 x 76 x 90 mm
Approx. 105 x 76 x 48 mm
(using without the stand)
Approx. 115 g (including the stand)
0 °C to 40 °C, Up to 90 % RH
(Relative Humidity) non condensing
-
-
-
-
-
ABS resin
1
Door station 2
(Non polar)
(Non polar)
PBX
2
Terminal box
(4-conductor wiring)
(Non polar)
(Non polar)
(Non polar)
Distance
Maximum 50 m
Maximum 100 m
Wood screws
Wire (Not included)
Mounting bracket
165 mm
Main Monitor
Mounting bracket
• The actual product may vary slightly from photograph.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Charger
76
90
115
AC adaptor
-
-
-
-
-
-
-
-
ABS resin
Door
(Door Opener) 1
Door
(Door Opener) 2
Loop resistance
10 Ω or lower
83.5 mm
Wall
58.3 mm
190 mm
83.5 mm
Advertisement
