Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Durr Dental HD 410
- Page 1 Installation and Operating Instructions Hygocare Sensor 9000- 616- 09/ 30 2007/05...
-
Page 2: Appliance Disposal
• Dürr Dental are only responsible for the equip- as an automatic, no-touch dispenser for Dürr ment with regard to safety, reliability and pro- HD 410 Hand disinfection and Dürr HD 435 per functioning where assembly, resettings, Hand washing Lotion. -
Page 3: Delivery Contents
This Securing screw ..........1x appliance is not to be used in areas where the atmosphere could cause fire. Stand ............1x Battery 9 V .............1x 3.2 Disposable materials HD 410 Hand disinfection ..CDH410C3502 HD 435 Hand washing lotion ..CCH435C3502... -
Page 4: Installation
Installation 4. Installation Choose a suitable position for the Hygocare Sensor. The Hygocare should ideally be set up with its opening nozzle located over the wash basin. The Hygocare should not be exposed to direct light beams. Do not install in a position where the sensor could be externally influenced. -
Page 5: Wall Installation
4.2 Wall installation • Mark the position for mounting holes using the mounting plate supplied. • Drill holes and place dowels in position. • Secure the wall mounting bracket to the wall using the screws supplied. • Place the sealing ring between wall mounting bracket and Hygocare. -
Page 6: First Use
5. First use Before using the Hygocare Sensor for the first time, check that it is positioned and set up correctly. • Securely fasten the disposable pump onto the bottle with fluid. See fig. 5 • Turn the bottle with its pump upside down and slide into the dispenser head. -
Page 7: Operation
• Disconnect the Hygocare from the battery to and regulations. avoid accidental release of liquid. 7.2 Changing the bottles • Only use Dürr HD 410 Hand disinfection (order number: CDH410C3502) and Dürr HD 435 Hand washing lotion (order number: CCH435C3502).
Need help?
Do you have a question about the HD 410 and is the answer not in the manual?
Questions and answers