Install The Dvd Player In A Car; Turn On - Philips PET727/58 User Manual

3
On the amplifi er with a Dolby digital stereo system, connect the
white end to the left audio input socket and the red end to the right
audio input socket.

Install the DVD player in a car

Warning
•
While this player is being used in your vehicle, be sure it is safely secured and does
not obstruct safety devices like air bags or seat belts.
1
Strap the car pouch over your car seat headrest.
2
Insert the DVD player into the pouch.
3
Close the buckle and adjust the belt until it fi ts tightly around the
headrest.
Tip
•
You can place the DVD player anywhere in the car as long as the cable length allows.
Fasten the pouch straps if you do not put the DVD player inside the pouch.

Turn on

1
Switch the POWER ON / OFF/CHR slide selector to the ON
position.
»
The green power indicator turns on.
18 EN