Table of Contents Introduction 1.1 Development Platform Contents Feature Diagrams Setup 3.1 Connecting the Debug Board 3.2 Getting to a U-Boot Prompt 3.3 Connecting the Battery 3.4 Charging the Battery Product Notices Support Resources 5.1 Register your Development Platform 5.2 Hardware Documentation 5.3 Software Resources 5.4 Warranty Statement Revision History...
Page 5
Table of Figures Figure 2.1 – Handheld Features (Front) Figure 2.2 – Handheld Features (Bottom) Figure 2.3 – Handheld Features (Side) Figure 2.4 – Handheld Features (Back / Covers Removed) Figure 2.5 – Debug Board Features Figure 3.1 – Connect Power Supply and Adapter Figure 3.2 –...
1 Introduction Congratulations on your purchase of the Zoom™ OMAP36x Mobile Development Platform (MDP). The Zoom OMAP36x MDP addresses essential needs of the open-source community and high-level operating system (HLOS) developers to speed software development for smartphones and Mobile Internet Devices (MIDs).
Figure 2.2 – Handheld Features (Bottom) HDMI Port Telephony Audio / Video Out Jack Headphone Jack Power-in Jack USB Mini-AB Port Figure 2.3 – Handheld Features (Side) Power Button Volume Toggle Select Button 6-in-1 SD/MMC Card Slot OMAP36x MDP QuickStart Guide...
However, using the DC Input jack on the debug board will not charge the handheld battery. Never have more than one power supply connected to the Zoom OMAP36x MDP at any given moment. 3.2 Getting to a U-Boot Prompt Verify the debug board is connected to the handheld.
Launch your terminal emulation program. (Although Logic does not support any particular terminal emulation program, we suggest using Tera Term Pro for Windows 2000 or XP, which can be downloaded from Logic’s website at: http://support.logicpd.com/downloads/240/ ). 10. Open a new serial port connection in your terminal emulation program with the...
Fully insert the connector. 3.4 Charging the Battery The power supply included with the Zoom OMAP36x MDP can be used to charge the battery. Connect the regulated 5V power supply to the appropriate power adapter for the region in which you are using the development platform.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI and Logic from all claims arising from the handling or use of the goods. Due to the open construction of the product, it is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge.
You will receive an e-mail with a URL link to confirm account creation. Click on the link to finalize account creation. You will be directed to a page on Logic’s website that states “Account Activated”. At this point you can register your product. Click on the link to “register your development kit and get access to downloads”.
For information on the Zoom OMAP36x MDP software community, please visit: http://www.omapzoom.org 5.4 Warranty Statement Please refer to the “Important Notice” enclosed with the Zoom OMAP36x MDP for warranty statements, RMA information, and other important notifications. OMAP36x MDP QuickStart Guide...
6 Revision History EDITOR REVISION DESCRIPTION APPROVAL DATE PN 1013915 JCA Initial Release 02/22/10 Please check www.logicpd.com for the latest revision of this manual and other documentation. OMAP is a registered trademark of Texas Instruments Incorporated. OMAP36x MDP QuickStart Guide...
Page 20
Logic Product Development makes no warranty for the use of its products. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein.