Advertisement
INSTALLATION INSTRUCTIONS
Bottom of Mirror
Determine the location of the mirror. Mark the location of the bottom of the mirror and the centerline of the
‰
mirror.
Measure up 25-5/16" (64.3 cm) from the bottom of the mirror and make a mark on the centerline.
‰
Line up the center of middle hole of the wall cleat with the mark on the centerline.
‰
Make sure the wall cleat is level, and mark the location of the holes.
‰
If any of the holes line up with a stud, drill a pilot hole for the screw. Drill the remaining holes so that the
‰
anchors fit snugly in them.
Insert anchors in holes, tapping lightly with a hammer, if necessary.
‰
Attach the wall cleat to the wall with the screws.
‰
Remove any visible markings from wall.
‰
Gently lower the mirror assembly onto the wall cleat while centering the hanging cleat on the wall cleat.
‰
1149477_2_A
3 of 3
INSTALL The MIRROR
3-3/8" (8.6 cm)
Anchors
3-3/8" (8.6 cm)
Screws
25-5/16"
(64.3 cm)
Mirror Assembly
C L of Mirror
Wall Cleat
Hanging Cleat
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
Mirror
Advertisement
