Tubes are guaranteed for thirty days. Power Output 3 watts per channel into 8 ohms Within this period, Lyrita Audio will repair the amplifier without charge, provided that failure was not due to Frequency Response 40 Hz to 20 kHz misuse.
Page 3
Description Operation The 2A3 SET is a low power tube, stereo power amplifier, offering superb reproduction of sound. Tube amplifiers need a load connected to their output. Al- ways connect the speakers before operating the ampli- This amplifier has to be operated using a preamplifier, which fier.
Page 4
If any doubt loudspeakers as possible. This will allow the connections to remains, contact Lyrita Audio for servicing. be made with short speaker cables. It is advisable to keep the additional impedance seen by the amplifier as low as possible.
Need help?
Do you have a question about the 2A3 SET and is the answer not in the manual?
Questions and answers