Table of Contents
Advertisement
GENERAL EXPLANATION
About this manual
This manual gives the basic instructions for operating this DVD player.
Some DVD discs however are produced in a way that requires specific oper-
ation or allows only limited operation during playback. In these cases the
player may not respond to all operating commands. When this occurs,
please refer to the instructions in the disc inlay. When a " " appears on
the screen, the operation is not permitted by the player or the disc.
Remote control operation
• Unless otherwise stated, all operations can be carried out with the
remote control. Always point the remote control directly at the player,
making sure there are no obstructions in the path of the infrared beam.
• When there are corresponding keys on the main unit, they can also be used.
Menu navigation
• Your player has an intuitive menu navigation system to guide you through
various settings and operations.
• Use the function keys to activate / disable relevant operations.
• Use 3, 4, 1, 2 to browse through menus.
• Press
ENTER
key to confirm your selection.
10
BASIC FUNCTIONS
Switching on for OSD language setup
English is the default language of your player's on screen display. You may choose to
use English, French, or German for your player's on screen display.
Region
OSD Language Options
Europe
English, French, German
1
Slide the POWER switch to ON to switch on the
player.
2
Press SETUP for the setup menu.
3
Select General Setup Page and press ENTER.
Scroll and select OSD Language and press 2 to
4
select from OSD language options.
5
Select your preferred language and press ENTER.
Loading discs and switching on
1
Slide OPEN to open the disc door.
2
Insert your chosen disc, label side up (also when a double sided
DVD disc is inserted). Make sure it is sitting properly in the correct recess.
3
Gently push to close the door.
4
Slide the POWER switch to ON to switch on the player.
✔
TIP
A normal mechanical noise is heard during playback.
Advertisement
Table of Contents
