Maintenance - Ryobi R4SD Original Instructions Manual

WARNING
Injuries may be caused, or aggravated,
by prolonged use of a tool. When using
any tool for prolonged periods, ensure
you take regular breaks.

MAINTENANCE

WARNING
The product should never be connected
to a power supply when assembling
parts, making adjustments, cleaning,
performing maintenance, or when the
product is not in use. Disconnecting the
product will prevent accidental starting
that could cause serious injury.
When servicing, use only identical
replacement parts. Use of any other
parts may create a hazard or cause
product damage.
Avoid using solvents when cleaning
plastic parts. Most
susceptible to
commercial solvents and may be
damaged by their use. Use clean
cloths to remove dirt and carbon dust.
Do not, at any time, let brake fluids,
gasoline, petroleum-based products,
penetrating oils, etc., come in contact
with plastic parts.
chemicals that can damage, weaken,
or destroy plastic.
Always wear safety goggles or safety
glasses with side shields during power
tool operation or when blowing dust.
If operation is dusty, also wear a dust
mask.
For greater safety and reliability, all
6
plastics are
various types of
They contain
repairs should be performed by an
authorised service centre.
LUBRICATION
All of the bearings in the product are
lubricated with a sufficient amount of
high grade lubricant for the life span
of the product under normal operating
conditions. Therefore,
lubrication is required.
ENVIRONMENTAL PROTECTION
Recycle
instead
as waste. The machine,
accessories and packaging
should
e n v i r o n m e n t a l - f r i e n d l y
recycling.
SYMBOLS
Safety alert
EurAsian Conformity Mark
CE conformity
Ukrainian mark of conformity
Please read the instructions
carefully before starting the
machine.
Please read the instructions
carefully before
starting the machine.
Safety
no further
raw materials
of disposing of
be sorted for