Repair And Service - WilTec 61989 Operation Manual

4) Avoid the use of an extension cord because the extension cord may overheat and cause a risk of
fire. However, if you have to use an extension cord, the cord shall be 14 AWG minimum size and
rated not less than 2000 watts.
5) Do not operate within 7.6 m (25 feet) of flammable material.
Never block the front grill of the heater.

The heater is not suitable for hazardous locations.

Never attempt to service the heater without disconnecting its power source.
C-Cleaning and Maintenance Instructions
Unplug your heater first.

Unplug power cable
Take out the front grid to clean the reflector (reflecting mirror) and the filament and apply the in-

structions.

Repair and Service

Attention! Only technical services and persons authorized may serve, repair and replace the

parts of this heater.
Please read safety instructions carefully for the security of you, your family and your belong-
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Never pull your power cable to
Distinguished Customer:
ings before operating your appliance.
unplug your heater
Seite 4