Super Bright LEDS WN-FL01-RD0 User Manual

Important: Read all instructions prior to installation.
LED Flood Light

Safety and Notes

• Product should be installed and serviced in accordance with
applicable national, state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched off before performing
any installation or wiring procedures.
• Avoid looking directly into lamp when illuminated.
• Ensure all mounts are securely attached and will support the
weight of the fixture. Failure to properly support fixture may result
in damage or injury, for which the manufacturer does not
assume responsibility.

Specifications

Model
Operating Voltage Range
Total Power Consumption
Current Draw
Beam Angle
Operating Temperature
Environmental Rating
Dimmable

Installation Instructions (U-bracket/Yoke Mount)

1. Drill holes for mounting and wiring as needed.
2. Securely attach light to surface and connect wiring.
3. Apply power and rotate light head to desired angle.
WN-FL01-RD01
100–277 VAC
18 W
0.15 A@120 VAC
NEMA 2x2 (20°x20°)
-40°–122° F(-40°–50° C)
IP65
No
Drill

Wiring Diagram

Line
Neutral
Ground
Dim (+)
Dim (-)
Rev Date: V0.1 07/24/2019
4400 Earth City Expy, St. Louis, MO 63045

User Manual

WN-FL01-RD01
AFL-50K50-110-U
L L
White
N N
Green
GND GND
Purple
+ +
- -
866-590-3533 superbrightleds.com
Black
Gray
hex-key