First Time Configuration - Triax TEOC 211 User Manual

2.

First time configuration

Quick connection
•
In all cases (terrestrial or cable network), the first TEOC 211 adapter needs to be connected to your
house Internet access (Cable modem, ISP modem,...) via the supplied Ethernet patch cord, to get
an Ethernet signal into the system.
Connexion to a terrestrial television distribution system
•
Make a connection from a free OUTPUT on the TV aerial distribution amplifier to the "TV+WWW" F
connector on the TEOC 211 adapter. It is essential that the first TEOC 211 adapter is only
connected to an OUTPUT port of the amplifier, as the Ethernet over coax signal cannot pass
through any amplifier.
At the second end where the Ethernet signal is wanted, you need to use a second TEOC 211
(without Wi-Fi extender) or to a TECW 211 (with build-in Wi-Fi extender). On this second device,
connect the "TV+WWW" F connector to the wall outlet (TV port).
To remake the connection to the TV or a DVB-T set top box, so that the signal is passing through
the TEOC 211 (or TECW 211), use the supplied coaxial fly lead between the TEOC 211 "TV" port
and your TV or STB.
Connect any Ethernet devices – Smart TV, Game console, Blu-ray player, IP Set top Box etc. using
the supplied Ethernet patch cord.
Power up the 2 TEOC 211 devices, the link between the devices is established automatically, this is
confirmed when the LED
TV signal can be passed through the device.
EN
is ON. (It may take a few minutes to link.). The cable or terrestrial
6
User manual