Operating Instructions For The Winch; Taking Delivery And Setting Up The Machine For Operation; Lifting The Machine; The Transport Set-Up And Unpacking - Palax C750 Ergo Instruction Manual

longer be considered to correspond to its original configuration.
Other possible expenses or financial claims due to the above-mentioned
measures.
any indirect costs and/or travel expenses incurred from making repairs under the
guarantee.
For parts changed during the warranty period, the warranty expires at the same time as
the warranty period of the machine.
Consult your dealer about matters related to the warranty.

1.12 Operating instructions for the winch

Please refer to the user manual of the winch or visit our website at www.palax.fi for more
detailed operating instructions for the winch.
2 TAKING DELIVERY AND SETTING UP THE MACHINE FOR
OPERATION

Lifting the machine

2.1
There are lifting lugs for lifting the machine with a crane at both ends of the machine, at
the rear edge of the splitting chute and at the rear edge of the infeed deck.
The machine can be lifted with a forklift truck from both sides. There are guide rails for
lifting forks under the chassis.
2.2

The transport set-up and unpacking

The machine is delivered almost ready assembled and with the conveyor attached.
In order to avoid damage during transportation, the machine is delivered partly
dismantled so that all the protruding levers and the hitching parts of a tractor-powered
machine have been removed and packed separately.
The extension table for the infeed conveyor and the loading conveyor are in the
transport position.
The angular gear is filled with transmission oil.

Acceptance inspection

2.3
Check the delivered goods without delay.
If the product shows transport damage, contact the transport company and your dealer
immediately.
Main parts of the machine, Fig 1
2.4
1. Infeed conveyor support
2. Infeed conveyor belt
3. In-feed conveyor
4. Conveyor support
5. Emergency stop lever, tractor-powered machine
6. Blade cover
7. Multi-function lever, crosscut and infeed operations
8. Protective net for splitting chute
9. Adjustment lever 12 for the splitting wedge
10. Conveyor
Palax C750 Translation
12
1-2018