Table of Contents
Advertisement
Quick Links
INSTALLATION MANUAL
S107USB / K107USB
RS485/USB asynchronous serial converter
E
SENECA s.r.l.
Via Austria, 26 – 35127 – PADOVA – ITALY
Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287
For manuals in other languages and configuration software, visit:
www.seneca.it/products/k107usb ; www.seneca.it/products/s107usb
MI001076-E
1/8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Seneca S107USB
Summary of Contents for Seneca S107USB
- Page 1 INSTALLATION MANUAL S107USB / K107USB RS485/USB asynchronous serial converter SENECA s.r.l. Via Austria, 26 – 35127 – PADOVA – ITALY Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287 For manuals in other languages and configuration software, visit: www.seneca.it/products/k107usb ; www.seneca.it/products/s107usb MI001076-E...
-
Page 2: Product Description
PRODUCT DESCRIPTION The S107USB and K107USB products, constitute an interface able to realize an asynchronous RS485 serial, using a USB port present on the PC. Thanks to the driver provided, the serial interface is treated by the operating system as a standard system serial port, allowing the use of the product directly through any software capable of communicating with the standard serial ports provided by the operating system (COM1, COM2, etc). -
Page 3: Preliminary Warnings
, stripping 8 mm CONNECTIONS (K107USB) Through PC USB port. POWER SUPPLY RS485 through MODBUS -RTU protocol, 32 nodes maximum. SERIAL COMMUNICATION Possibility of multiple connection of several S107USB or K107USB units on the same PC. 1200 bps,115200 bps. BAUDRATE... -
Page 4: Installation Regulations
S107USB INSTALLATION REGULATIONS With regard to the S107USB instrument, there are no particular precautions to follow, except that of using a shielded cable for the RS485 lines for long connections or connections in noisy environments (please refer to the Electrical Connections section). -
Page 5: Electrical Connections
ELECTRICAL CONNECTIONS S107USB: the electrical connections of the S107USB are shown below: By inserting an external jumper between terminals T1 and T2, the terminator of the RS485 line is enabled. We also recommend to use a shielded cable for the RS485 line, in particular if long connections are to be made or in noisy environments. -
Page 6: Driver Installation
DRIVER INSTALLATION The user is provided with a CD containing the instrument driver. In this section we will describe in detail the driver installation procedure. It should be noted that the installation in Linux environments (with Kernel 3.0.0-19 or later) is automatic and does not require the driver CD. - Page 7 If the installation does not start automatically, you will have to proceed manually, following the instructions given. First of all you need to have an internet connection allowing the instrument to perform the driver update following the automatic procedure or by connecting (http://www.ftdichip.com/Drivers/VCP.htm). For the automatic proce- dure, configure as in Fig 3.
-
Page 8: Contact Information
Product information commerciale@seneca.it This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised. The con- tent of this document corresponds to the described products and technologies. Stated data may be modified or supplemented for technical and/or sales purposes.
Need help?
Do you have a question about the S107USB and is the answer not in the manual?
Questions and answers