Interference; Mounting - Window Master WWS 100 Installation Manual

Interference

The measurement results of the device can be influenced by external factors.
Possible sources of interference are:
• Air movement, e.g. through windows, doors, by convection, heating.
• Direct sunlight and other heat sources.
• If the device is installed close to electrical consumers e.g. dimmers.
• Vibrations or shocks.
• Pollution due to paint, wallpaper paste and dust from renovation/construction
work
• Organic solvents and their vapours.
• Plasticizers from stickers and packaging: e.g. bubble wrap or polystyrene

Mounting

• This device is suitable for wall
mounting.
• The device should not be mounted
in dusty environment.
• Ensure that no dust get inside of
this device.
Open the box at the bottom and remove
the front cover! Unplug the ribbon cable
NOTICE
Make sure to reattach the ribbon cable.
Disconnect the power
supply before wiring
and installation.
Mount the rear cover on a wall or on a
flush-mounting box.
4