Do you have a question about the Exclusive and is the answer not in the manual?
Questions and answers
Андрей
April 7, 2025
С каким давлением осуществляется отвод воды после мойки в канализационную стстему
1 comments:
Mr. Anderson
May 14, 2025
The water drainage pressure for the WIESHEU Exclusive model after washing is indicated by the pressure sensor, which may show overpressure if water does not drain. However, the exact drainage pressure value is not specified.
This answer is automatically generated
Summary of Contents for WIESHEU Exclusive
Page 1
Control Units Exclusive and IS 600 E Original Operating Instructions...
2.2.2 “Preheating” program step (01 Preh) 2.2.3 “Steaming” program step (02 Steam) 2.2.4 “Baking” program step (03 Back) 3 Functions and Operation of the Controls 3.1 Working with the touchscreen display (Exclusive): 3.2 Functions of the slider (Exclusive): 3.4 Switching on 4 The Main Menu 5 “Work”...
Page 3
12.3.1 Tem- perature unit °C or °F 12.3.2 Time/date format 12.3.3 Language 12.3.4 Einfache Sprachumschaltung (nur bei Steuerung Exclusive) 12.4 Door + control panel lock 12.4.1 Door lock after x seconds 12.5 Open door when program ends 12.6 Picto 12.7 Display 12.7.1 Logo...
Page 4
13.6 Factory settings 14 “Date and time” menu item 15 Menu item “User administration” 15.1 Expanded user administration 16. “Report” Menu Item 16.1 Settings 16.2 Status messages 17 Error Messages 18 Copyright · · Exclusive and IS 600 E Version 18-01 9401-191-003-EN...
This operating manual describes the function and operation of the Exclusive and IS600E controls. Some of the functions that are described depend on the respective oven type and thei options.
1 - 8 Temperature 210°C Motor rotation speed Not with Ebo (= 12-100%) Temperature 210°C Exhaust air damper 8 100 % open / closed setting Exhaust air closed Illustration: Ebo Page 3 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
(= 12-100%) Edit step Auto-start Exhaust air damper open / closed setting Temperature 210°C Temperature 210°C Set time 13:00 min 8 100 % Exhaust air closed Illustration: Ebo Page 4 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
3 Functions and Operation of the Controls 3.1 Working with the touchscreen display (Exclusive): You can start baking programs directly using the touchscreen display. Use your finger to touch the desired pictogram (product image ■ or function) on the display.
15:32:15 15:32:15 2017-01-11 2017-01-11 Illustration: Ebo Illustration: convection oven Press the “C” button once or several times to go back to the main menu from any menu item. Page 6 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
“Text”/(1), “Picto” (2), Text/Picto (3) menu setting, refer to the chapter entitled “Operator Settings” Refer to the “Cleaning Systems” operating instructions for the operation of the automatic cleaning system (ProClean and LiquidClean). Page 7 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
■ Change the settings using the slider/rotary button. ■ Press the “ON / OFF” button. → You go back to the “Manual baking” program. → The system applies the changed values. Page 8 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
Page 13
■ Use the slider/rotary button to choose the “Start” setting. → The baking process starts with the changed settings. The settings will remain saved until the next change. Page 9 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
■ Use the slider/rotary button to correct the parameter. Open ■ Press the “C” button. Enter motor speed Auto-start → The system closes the input field. 2 50% → The parameter has been changed. Page 10 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
■ Press the “C” button. → The system shows the following message on the display: stopwatch? “End stopwatch? Yes / No” ■ Select “Yes”: → You are in the main menu. Page 11 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
→ The baking program is continued. ■ Select “No”: → The baking program is cancelled. The controller has a maximum of 200 programs with 20 baking steps each. Page 12 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ At the end of the program run, the system issues an audible Baking off? signal. → The system shows the following message on the display: “Baking off?” Page 13 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
■ Use the slider / rotary button to choose the “Switch off” menu item. Cleaning position → The device is switched off. Programming Settings → The logo is shown on the display. 15:32:15 15:32:15 2017-01-11 2017-01-11 Page 14 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
2017-01-11 Designation Button Start Button Stop/reset Time input Setting of temperature Setting of steaming Setting of exhaust air valve Setting of fan speed Selection of load 15:32:15 2017-01-11 Page 15 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
Page 20
→ The system shows an overview of all the loads on the display. 15:32:15 2017-01-11 Selection using the touch display (Exclusive): ■ Use your finger to touch the desired symbol on the touch display. ■ Use the slider/rotary button to enter the values for the parameters.
Page 21
→ The timeout is displayed with a minus sign and in red type. In this menu the “Steam” function is limited to “Manual steaming”. No values can be entered. Page 17 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
8 “Appliance ID” Menu Item Refer to the device data of your WIESHEU baking oven. Work You are in the main menu. Dibas 64 M Automatic door ■ Select the “Appliance ID” submenu. EXCLUSIVE SW: xxxx EXCLUSIVE HW: x → The appliance data is displayed.
● Insert new program Copy Program 5 Copy ● Copy program Move Move Delete ● Move program Delete entry Delete ● Delete program ● Delete entry 15:32:15 ● Add program 2017-01-11 Page 19 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
Copy ● New program step Program 5 Copy Move ● Copy program step Move Delete ● Move program step Delete entry Delete ● Delete program step 15:32:15 2017-01-11 Page 20 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The system shows the following message on the display: “Save changes? Yes / No”. 15:32:15 2017-01-11 ■ Select “Yes”: → The entry / change is saved. ■ Select “No”: Save changes? → The process is cancelled. Page 21 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
■ Use the slider/rotary button to choose “ON”. ■ Select item “Degree of browning” (D). → The system opens another input window. ■ Use the slider/rotary button to choose the necessary setting (E). Page 22 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
Copy 03 Bake 180°C ■ Select “Yes”: Move → The entry / change is saved. Delete ■ Select “No”: 15:32:15 2017-01-11 → The process is cancelled. Save changes? Page 23 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
→ The system shows the following message on the display: 02 Steam 180°C Copy “Save changes? Yes / No”. Copy 03 Bake 180°C Move Move Delete Delete entry Delete 15:32:15 2017-01-11 Page 24 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The program step is saved at the new position. 03 Bake 180°C Move Move Delete Delete Delete entry ■ Select “No”: → The process is cancelled. 15:32:15 2017-01-11 Save changes? Page 25 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
03 Bake 200°C 03 Bake 200°C → The subsequent baking programs have moved down by one position. ■ Select “No”: 15:32:15 → The process is cancelled. 2017-01-11 Save changes? Page 26 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The program is moved and inserted at the selected position. Edit Edit Program 3 → The subsequent programs move down by one program position. Program 4 Copy Copy Program 5 Move Move Delete Delete 15:32:15 2017-01-11 Page 27 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
When you delete the entry, the program is removed from the program list. The program is not deleted from memory; the program is still available in the memory. Retrieve the program again to the program list (display) via the “Add program” menu. Page 28 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
Main menu Work manual baking Switch off Auto-start Stopwatch Appliance ID Appliance ID Operator settings Cleaning position Appliance Settings Programming Date and time Settings User management Report Service Page 29 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
● User management ● Report ● Service Service settings are accessible to WIESHEU service partners only! 11.1 Auto-start You can set and store 39 different, individual Autostart settings. If weekday and date are defined the first weekly Autostart starts from the day of the defined date.
Page 35
The system displays the next Auto-start. If the next active Auto-start is on a public holiday, it is deactivated. On the display, the system shows the next Auto-start that follows the deactivated one. Page 31 Exclusive and IS 600 E · 9401-191-003-EN ·...
→ The system shows the following message on the display: 2017-01-11 “Save changes? Yes / No” ■ Select “Yes”: → The changes are saved. → Autostart is displayed as soon as the oven is switched off. Page 32 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
NIGHTSTA For information on installing pictogram files, refer to the chapter “Appliance setting” - “Communication”. 11.2. Appliance ID Refer to the device data of your WIESHEU store baking oven. You are Work in the main menu. Dibas 64 M Automatic door ■...
● Door + control panel lock 2017-01-11 ● Open door when program ends ● Picto ● Display ● Continue baking after door movement ● Close program after door movement Page 34 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The display shows the message: 15:32:15 14/08/2017 ”Save changes? Yes / No” ■ Select ”Yes”: Save changes? → The setting is saved. ■ Select ”No”: → The process is cancelled. Page 35 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
■ Use the slider / rotary button to select the “Sound” menu. The following submenus are displayed in the “Sound” menu: ● Button volume ● General volume 15:32:15 2017-01-11 ● Signal time ● Sound table Page 36 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
■ Select “No”: → The process is cancelled. Is your work area rather spread apart or noisy? If necessary, you can then have an additional visual or audible signal installed. Contact your authorised WIESHEU dealer or Service Partner for details. Page 37 Exclusive and IS 600 E ·...
X sec. ● Signal Pause ○ Without [Pause] ○ Time in seconds [1-900] (L) X sec. X sec. X sec. ■ Set the individual signal time. sec. sec. Page 38 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
500 kb (preheating sound, completed sound). The file type must be a *.WAV file. For information about installing sound files, read the chapter entitled “Appliance settings” - “Communication”. Page 39 Exclusive and IS 600 E · 9401-191-003-EN ·...
The selected language is activated as soon as you exit the main menu. Caution! Set only a language you are able to read and understand. Otherwise, you may not be able to operate the control. Page 41 Exclusive and IS 600 E · 9401-191-003-EN ·...
12.3.4 Simple language switching (with Exclusive controller only) Do you need to switch the language of menu navigation in the control- Country settings ler on a regular basis? °C or °F If this is the case, select simple language switch to allow you to switch...
300 seconds. The time setting is made in 10-second increments. The lock can only be released by an individual PIN entry. 12.5 Open door when program ends This menu item has no function with this appliance series. Page 43 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
*.BMP. For information on installing pictogram files, refer to the chapter entitled “Appliance setting” - “Communication”. If more than 9 pictograms are stored in the program list this is indicated by blue arrow in the display. Page 44 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
The maximum size of the logos must be 480 x 480 pixels with a maximum image depth of 24-bit. The file must be of type *.BMP. For information on installing logo files, refer to the chapter entitled “Appliance setting” - “Communication”. Page 45 Exclusive and IS 600 E · 9401-191-003-EN ·...
→ The display shows the message: 15:32:15 14/08/2017 ”Save changes? Yes / No”. ■ Select ”Yes”: → The setting is saved. Save changes? ■ or ■ Select ”No”: → The process is cancelled. Page 46 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The display shows the message: “Save changes? Yes / No” ■ Select “Yes”: Save changes? → The setting is saved. ■ Select “No”: → The process is cancelled. Page 47 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
Connect your USB medium with the oven or set up the network con- nection of your store baking oven. Network setting ■ Choose the desired communication interface: ● USB ● Network setting 15:32:15 Page 48 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
/ logos as *.BMP files. After loading baking programs from a USB stick you must retrieve them from the control unit's memory to the user interface display. Read the section “Add program” in the “Programming” chapter to this end. Page 49 Exclusive and IS 600 E · 9401-191-003-EN ·...
Page 54
→ The transfer was faulty → Check the connection → Check the file format Error! ■ Press the “ON / OFF” button. ■ Remove the USB device. USB error Page 50 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The display shows the message: “Are you sure?” ■ Select “Yes”: Save changes? → The delete process will be carried out. ■ Select “No”: → The process is cancelled. Page 51 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
→ The display shows the message: “Save changes? Yes / No” Enter time ■ Select “Yes”: → The setting is saved. ■ Select “No”: → The process is cancelled. Save changes? Page 52 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The display shows the message: “Save changes? Yes / No”. Enter time Select “Yes”: → The setting is saved. ■ Select “No”: → The process is cancelled. Save changes? Page 53 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
→ The display shows the message: Switch on/off “Save changes? Yes/No” Choose “Yes”: → The setting is saved. ■ Select “No”: Save changes? → The process is cancelled. Page 54 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
→ The display shows the message: Switch on/off “Save changes? Yes/No” Choose “Yes”: → The setting is saved. ■ Select “No”: Save changes? → The process is cancelled. Page 55 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
→ The residual heat is retained. → The display shows the message: “Save changes? Yes/No” Save changes? Choose “Yes”: → The setting is saved. ■ Select “No”: → The process is cancelled. Page 56 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
2017-01-11 ■ Absolutely active: Menu item “SwitchOff” is activated and the “Operable” menu item is activated. → No action / access is possible for the preset time periods! Page 57 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
Page 62
→ The in-store baking oven remains in stand-by mode. ■ No, the current time has already been exceeded: → The oven can be switched on by the operator. Page 58 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
“Are you sure? Yes / No” Reset device data? ■ Select “Yes”: → All the data will be reset to factory settings. Are you sure? ■ Select “No”: → The process is cancelled. Page 59 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
Baking off Stopwatch Appliance settings Leave work Login Appliance ID Date and time Settings User management Cleaning position User management Service Programming Report Reset login Report Settings Service Page 60 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
Page 65
**** → Settings submenu active Reset login Generated **** → Additional access rights possible Report 1234 ● “Generated” (E): → No access rights granted → Access not possible Page 61 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
The expanded settings are only visible when the settings in user administration are set to “conditional”. If the setting is set to “Off” or “PIN”, this menu is invisible to the user in the background. Page 62 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
View the current consumption levels of the following items: Status messages Water filter: Water filter ○ “OK” LiquidClean Cleaning agent full ○ “Change water filter” LiquidClean ○ “Cleaning agent full” ○ “Cleaning agent empty” 15:32:15 2017-01-11 Page 63 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
There is a risk of injury if you carry out work on the appliance incorrectly. ● To avoid serious injuries, only WIESHEU GmbH service engineers are allowed to carry out maintenance, service and repair work. ● Get in touch with the WIESHEU service engineers in your region. Error message Cause...
Page 69
Pro Clean 365 error. Request Error at the mixing station. Notify WIESHEU SIC* service! Pro Clean 365 cannot be No communication Notify WIESHEU SIC* reached. Request service! Page 65 Exclusive and IS 600 E · 9401-191-003-EN · Version 18-01...
Page 70
Auto switch off activated Set Auto switch off to inac- is possible! tive. See the chapter entitled ”Energy saving, Auto switch off” *WIESHEU Service Information Center Phone: +49 7148 1629-400 Page 66 Version 18-01 · 9401-191-003-EN · Exclusive and IS 600 E...
We reserve the right to make technical and design changes. WIESHEU GmbH would be grateful for information about any errors that there may be in the text or graphics. The copyright for this document remains with WIESHEU GmbH.
Need help?
Do you have a question about the Exclusive and is the answer not in the manual?
Questions and answers
С каким давлением осуществляется отвод воды после мойки в канализационную стстему
The water drainage pressure for the WIESHEU Exclusive model after washing is indicated by the pressure sensor, which may show overpressure if water does not drain. However, the exact drainage pressure value is not specified.
This answer is automatically generated