Formatting The Micro Sd Card; Settings Menu - Optex SAFARI 5 Instruction Manual

OPERATING INSTRUCTIONS
8. F ormatting the Micro SD card
When using the Micro SD card for the first
time the message, "Please format SD card!"
may appear.
If the message appears please follow these
instructions:
a) W ith the camera turned off insert the
Micro SD card (up to 64GB capacity).
b) W ith the screen facing you. Hold the
Power/Mode button
power on the camera.
c) S hort press the Power/Mode button
cycle through the different modes until
you reach the Settings mode. The cogged
wheel icon will display on the screen. Press
the Shutter/OK button
Settings menu.
d) O nce in the Settings menu press Power/
Mode button
wheel icon. The yellow line under each
icon will move under the item that is
selected.
for 3 seconds to
Language
Date-Time
to enter the
Format
Reset To Factory Settings
to scroll to the cogged
Firmware Version
e) P ress the WiFi Down button
the, "Format" option. Then press the
Shutter/OK button
f) P ress WiFi Down button
"Confirmation" option. Then press the
Shutter/OK button
g) Format has been completed.
h) T o exit the Setting menu press Power/
Mode button
then press the Shutter/OK button
to
English Language
Date-Time
Format
Reset To Factory Settings
Firmware Version
.
.
once to reach the X icon,
Format
English
Con rmation will be memory
card format?
Con rmation Cancel
Menu For Memory
Card Formatting
to select
to select the
.
Press Shutter To Exit